Arrow Shafts

Easton Super Drive Micro

About the product

Easton’s new Super drive Micro 4mm arrow is the latest addition to the popular Super drive family of products. The Super drive Micro is Easton’s highest performing all-carbon arrow designed for all-purpose outdoor tournament use from target to field to 3D. Engineered to provide the lightest grain-per-inch weights possible in a given spine range, the Super drive Micro will maximize your shooting range and minimize your pin gaps, allowing for higher velocities both out of the bow and tighter gaps downrange. The Super drive Micro is available in 11 spines from 325 to 950 providing a choice for the best archers across every division with an extremely tight 0.002 inch straightness spec. Accompanying the Super drive is a full-line of glue-in target points, pin inserts, pin nocks, and direct-fit nocks Components sold separately.

Specifications
For Recurve, Bare Bow & Compound
Multi-layer wrapped 100% carbon-fiber construction
4mm parallel design
Specifically engineered for outdoor competition
Weight Tolerance +/- 1.0 grain
Straightness +/- .002 Inch
Available March 2022

Recommended Parts
4mm ML Point
4mm Pin
Pin Nock Recurve - Small
Pin Nock Compound – Large
4mm Mirco Lite Nock
4mm G Nock

More in this video

Archery Tech Team

Easton Shaft Jazz Purple Arrows

About the product

The Easton Jazz arrow is a budget friendly arrow that is perfect for beginning archers. The Easton Jazz arrow features all the accuracy benefits of XX75 alloy and comes in sizes all the way down to 1214 to outfit any beginning archer. The Easton Jazz arrow can be used for both beginning recurve and compound archers and is best used for indoor type competitions.

Specifications
7075 aerospace alloy.
Hard-anodized-purple finish.
Guaranteed straightness: ± .005”.
Weight tolerance: ± 2%
Strength (psi): 90,000
Components are sold separately.

For non-included but recommended parts/spare parts see the links down below
Easton Points Nibb
Easton Bullet Points For Jazz + Eagle
Easton Inserts RPS 8-32 Aluminum for Shaft Sizes 1716-2613
Easton Uni Bushing Aluminum 4mm Fits G Nock
Easton Nock G Large 98 Groove
Easton Nock G 4mm Small 88 Groove

Archery Tech Team

Easton Shaft FMJ Dangerous Game Arrows

About the product

When it comes to the world’s toughest animals, you need the hardest hitting arrow you can get. The Easton FMJ 5mm Dangerous Game gives deep penetration for the world’s heaviest and thickest skinned animals. Utilizing a high strength, heavy-duty carbon core wrapped in a full beefed up metal jacket. The Easton Dangerous Game has every bit of bone-crushing power you need for hunting anywhere on the planet.

Specifications
High-strength N-FUSED® carbon core with 7075 alloy metal jacket.
Guaranteed straightness: ± .002”.
Easy target pull.
Comes included with Easton X Nock, Brass X HIT conventional thread break-off insert.

For non-included but recommended parts/spare parts see the links down below
Easton Deep Six Steel Field Point
Easton 5mm Deep Six Steel RPS Insert
Easton Broadhead Adapter Ring
Saunders Screw-in Points Combo 12 Pieces

Archery Tech Team

Easton Shaft 5mm Full Metal Jacket Arrows

About the product

The Easton 5mm FMJ (Full Metal Jacket) is fabricated out of a high-strength carbon core with 7075 metal jacket. The Easton 5mm FMJ gives more penetration and adds a kinetic punch for an easier pass through thick hide & bone. The Easton 5mm FMJ comes included with pre-installed Easton X Nocks and Easton HIT 8-32 inserts.

Specifications
High-strength carbon core with 7075 metal jacket.
Easy target pull.
Straigtness: ± .002”.
Comes included with HIT 8-32 inserts and pre-installed Easton X Nocks.
Other parts are sold separately.

For non-included but recommended parts/spare parts see the links down below
Easton Deep Six Steel Field Point
Easton 5mm Steel 8-32 Half-out
Easton 5mm Deep Six Steel RPS Insert
Easton 5mm Brass HIT Break-off 8-32 Insert
Easton 5mm Aluminum 8-32 Half-out
Easton Broadhead Adapter Ring
Saunders Screw-in Points Combo 12 Pieces

More in this video

Archery Tech Team

Easton Target Shaft X10 Arrows

About the Product

The ultimate recurve competition shaft. The Easton X10 has won more World and Olympic titles than any other arrow- or any other archery product of any kind- since its competition debut at the 1996 Olympic Games in Atlanta, USA. Since making that gold-medal-winning debut, it has gone on to be used to win every single Olympic Medal since the Atlanta Games. High-modulus carbon fiber on a precision, thin-wall aluminum core creates an unmatched synergy of precision and durability. With components engineered to match the performance of this ultimate target shaft, every size X10 features a custom barreled design, providing the ultimate in clearance, finger release forgiveness, and the correct frequency match for modern recurve bows. X10. Nothing else comes close.

Made with pride by Easton in the USA.

Specs
High-strength carbon fiber bonded to a 7075 precision alloy core
Polished 9-micron carbon finish
Straightness: ± .0015”
Weight tolerance: ± 0.5 grains per packaged dozen
Weight coded for precision matching between dozens
Components—sold separately
Barreled design
Used to win every Olympic title since 1996

More to see in this video

1. Due to the barrel design of the X10, the weight is an average grains-per-inch of a 29” shaft. Shaft weight is slightly heavier in the larger diameter center and lighter toward the tapered ends. One inch of shaft cut from the point end typically weighs 6-7 grains.
2. Nominal O.D. at mid-point of shaft. Ends are smaller. Point end is larger diameter than nock end.
3. Recommended that no more than these lengths be cut from the point end of the shaft.

For non-included but recommended parts/spare parts see the links down below

X10 point tungsten
X10 point steel  
X10 outnock
pin nock
G pin nock (compound)

Archery Tech Team

Easton Target Shaft ACE

About the product

A/C/E -Aluminium Carbon Extreme- is the arrow which started a revolution that continues to this day. Light, strong and proven across the globe. Popular recurve or compound field shaft.

SPECIFICATIONS
High-strength carbon fiber bonded to a 7075 alloy core
Polished black carbon finish
Straightness ± 0.0015”
Weight tolerance ± 0.50 grains
Components—sold separately
Barreled design
Made in USA

GPI - Due to the Barrel design of ACE , the grain weight per inch shown is an average weight per inch GPI of a 29 inch shaft. The shaft weight is slightly heavier in the larger diameter and lighter towards the taper ends. One inch of shaft cut from the point end typically weighs 5-6 Grain.
O.D. outher diameter, Nominal O.D. at mid front of the shaft. Ends are smaller.
Trim Inches - Recommended that no more than these lenghts be cut from the front end of the shaft.

Archery Tech Team

Easton Target Shaft X10 Protour

About the product

Since its introduction, the compound-specific X10 Protour has won more titles and set more records for compound archers than all other choices combined. Specifically engineered for compound target competition, Protour features a front taper allowing for every size to use Easton X10 point components- the same components that have been used to win every Olympic medal since 1996. The precisely engineered mass to spine ratio of each Procomp size ensures the best ballistic performance at longer compound competition distances, and gives archers an undeniable edge in unpredictable windy weather. With unmatched precision and legendary durability in even the most abusive target materials on the world circuit, Procomp is at the absolute performance pinnacle for compound target precision. Every Procomp arrow is proudly Made in USA by Easton.

Specifications
Lightweight, high-modulus carbon fiber bonded to a precision 7075 alloy core
Polished black carbon finish
Straightness ± .0015 Inch
Weight tolerance ± 0.5 grains
Components—sold separately
Tapered design
Made in USA

More info in this video

GPI - Due to the taper design of the X10 Pro Tour, the grain weight per inch shown is an average weight per inch GPI of a 29 inch shaft. The shaft weight is slightly heavier toward the lager diameter nock end and lighter toward the tapered frond end. One Inch of the shaft cut from the point end typically weighs 6-7 Grain.
O.D. outher diameter, Nominal O.D. at mid front of the shaft. Frond end is smaller.
Trim Inches - Recommended that no more than these lenghts be cut from the front end of the shaft.

For non-included but recommended parts/spare parts see the links down below

X10 tungsten point
X10 steel point
Pin nock
G pin nock (compound)

Archery Tech Team