Shaft Carbon Aluminium

6 Products

Set Descending Direction
per page
View as Grid List
  1. Easton Target Shaft ACE
    As low as: €339.99

    Easton Target Shaft ACE

    About the product

    A/C/E -Aluminium Carbon Extreme- is the arrow which started a revolution that continues to this day. Light, strong and proven across the globe. Popular recurve or compound field shaft.

    SPECIFICATIONS
    High-strength carbon fiber bonded to a 7075 alloy core
    Polished black carbon finish
    Straightness ± 0.0015”
    Weight tolerance ± 0.50 grains
    Components—sold separately
    Barreled design
    Made in USA

    GPI - Due to the Barrel design of ACE , the grain weight per inch shown is an average weight per inch GPI of a 29 inch shaft. The shaft weight is slightly heavier in the larger diameter and lighter towards the taper ends. One inch of shaft cut from the point end typically weighs 5-6 Grain.
    O.D. outher diameter, Nominal O.D. at mid front of the shaft. Ends are smaller.
    Trim Inches - Recommended that no more than these lenghts be cut from the front end of the shaft.

    Archery Tech Team

    Learn More
  2. Easton Target Shaft X10 Protour
    As low as: €419.99

    Easton Target Shaft X10 Protour

    About the product

    Since its introduction, the compound-specific X10 Protour has won more titles and set more records for compound archers than all other choices combined. Specifically engineered for compound target competition, Protour features a front taper allowing for every size to use Easton X10 point components- the same components that have been used to win every Olympic medal since 1996. The precisely engineered mass to spine ratio of each Procomp size ensures the best ballistic performance at longer compound competition distances, and gives archers an undeniable edge in unpredictable windy weather. With unmatched precision and legendary durability in even the most abusive target materials on the world circuit, Procomp is at the absolute performance pinnacle for compound target precision. Every Procomp arrow is proudly Made in USA by Easton.

    Specifications
    Lightweight, high-modulus carbon fiber bonded to a precision 7075 alloy core
    Polished black carbon finish
    Straightness ± .0015 Inch
    Weight tolerance ± 0.5 grains
    Components—sold separately
    Tapered design
    Made in USA

    More info in this video

    GPI - Due to the taper design of the X10 Pro Tour, the grain weight per inch shown is an average weight per inch GPI of a 29 inch shaft. The shaft weight is slightly heavier toward the lager diameter nock end and lighter toward the tapered frond end. One Inch of the shaft cut from the point end typically weighs 6-7 Grain.
    O.D. outher diameter, Nominal O.D. at mid front of the shaft. Frond end is smaller.
    Trim Inches - Recommended that no more than these lenghts be cut from the front end of the shaft.

    Recommended parts

    X10 tungsten point
    X10 steel point
    Pin nock
    G pin nock (compound)

    Archery Tech Team

    Learn More
  3. Easton Target Shaft X10
    As low as: €419.99

    Easton Target Shaft X10 Arrows

    About the Product

    The ultimate recurve competition shaft. The Easton X10 has won more World and Olympic titles than any other arrow- or any other archery product of any kind- since its competition debut at the 1996 Olympic Games in Atlanta, USA. Since making that gold-medal-winning debut, it has gone on to be used to win every single Olympic Medal since the Atlanta Games. High-modulus carbon fiber on a precision, thin-wall aluminum core creates an unmatched synergy of precision and durability. With components engineered to match the performance of this ultimate target shaft, every size X10 features a custom barreled design, providing the ultimate in clearance, finger release forgiveness, and the correct frequency match for modern recurve bows. X10. Nothing else comes close.

    Made with pride by Easton in the USA.

    Specs
    High-strength carbon fiber bonded to a 7075 precision alloy core
    Polished 9-micron carbon finish
    Straightness: ± .0015”
    Weight tolerance: ± 0.5 grains per packaged dozen
    Weight coded for precision matching between dozens
    Components—sold separately
    Barreled design
    Used to win every Olympic title since 1996

    More to see in this video

    1. Due to the barrel design of the X10, the weight is an average grains-per-inch of a 29” shaft. Shaft weight is slightly heavier in the larger diameter center and lighter toward the tapered ends. One inch of shaft cut from the point end typically weighs 6-7 grains.
    2. Nominal O.D. at mid-point of shaft. Ends are smaller. Point end is larger diameter than nock end.
    3. Recommended that no more than these lengths be cut from the point end of the shaft.

    Recommended parts

    X10 point tungsten
    X10 point steel  
    X10 outnock
    pin nock
    G pin nock (compound)

    Archery Tech Team

    Learn More
  4. Easton Shaft FMJ 5 mm Dangerous Game
    As low as: €174.99

    Easton Shaft FMJ Dangerous Game Arrows

    About the product

    When it comes to the world’s toughest animals, you need the hardest hitting arrow you can get. The Easton FMJ 5mm Dangerous Game gives deep penetration for the world’s heaviest and thickest skinned animals. Utilizing a high strength, heavy-duty carbon core wrapped in a full beefed up metal jacket. The Easton Dangerous Game has every bit of bone-crushing power you need for hunting anywhere on the planet.

    Specifications
    High-strength N-FUSED® carbon core with 7075 alloy metal jacket.
    Guaranteed straightness: ± .002”.
    Easy target pull.
    Comes included with Easton X Nock, Brass X HIT conventional thread break-off insert.

    Size

    Shaft Weight
    GPI

    Spine @ 28″ span

    Stock Length

    RPS Point

    Broadhead Adapter Ring

    O.D.

    300

    16.0

    0.300

    32

    17/64

    BAR 6

    0.280

    250

    17.7

    0.250

    32.5

    5/16

    BAR 7

    0.290

    Recommended parts
    Easton Deep Six Steel Field Point
    Easton 5mm Deep Six Steel RPS Insert
    Easton Broadhead Adapter Ring
    Saunders Screw-in Points Combo 12 Pieces

    Archery Tech Team




    Learn More
  5. Easton Shaft 5mm Full Metal Jacket
    As low as: €149.99

    Easton Shaft 5mm Full Metal Jacket Arrows

    About the product

    The Easton 5mm FMJ (Full Metal Jacket) is fabricated out of a high-strength carbon core with 7075 metal jacket. The Easton 5mm FMJ gives more penetration and adds a kinetic punch for an easier pass through thick hide & bone. The Easton 5mm FMJ comes included with pre-installed Easton X Nocks and Easton HIT 8-32 inserts.

    Specifications
    High-strength carbon core with 7075 metal jacket.
    Easy target pull.
    Straigtness: ± .002”.
    Comes included with HIT 8-32 inserts and pre-installed Easton X Nocks.
    Other parts are sold separately.

    Size

    Shaft Weight
    GPI

    Spine @ 28″ Span
    Deflection in inches

    Stock Length
    Inches

    RPS Point
    O.D. Inches

    Broadhead Adapter Ring (5 grains)

    O.D.
    Inches

    Half Out Size

    500

    9.1

    0.500

    31

    17/64

    BAR 3

    0.256

    #1

    400

    10.2

    0.400

    31.5

    17/64

    BAR 3

    0.263

    #2

    340

    11.3

    0.340

    32

    9/32

    BAR 5

    0.269

    #2

    300

    12.0

    0.300

    32.5

    9/32

    BAR 5

    0.273

    #2

    250

    11.5

    0.250

    33

    17/64

    BAR 6

    0.290

    #2

    Recommended parts
    Easton Deep Six Steel Field Point
    Easton 5mm Steel 8-32 Half-out
    Easton 5mm Deep Six Steel RPS Insert
    Easton 5mm Brass HIT Break-off 8-32 Insert
    Easton 5mm Aluminum 8-32 Half-out
    Easton Broadhead Adapter Ring
    Saunders Screw-in Points Combo 12 Pieces

    More in this video

    Archery Tech Team

    Learn More
  6. Easton Shaft ProComp 2019
    As low as: €219.99

    Easton Shaft ProComp 2019 Arrows

    About the product

    Highest quality and high performance normally come with a hefty price tag. Well not any more. Easton’s new A/C Procomp arrow is now available for compound target and field competition. The light-weight, high speed, parallel design Procomp is designed for archers looking to boost their scores at competitive and club-level compound events. The Procomp was proven at high level tournament circuits in the 2018 outdoor season by World Champions: Steven Anderson and Braden Gellenthien. Taking five World Archery podiums and another at the first event of the 2019 World Cup season. The 4mm Procomp features Easton’s unmatched spine accuracy and precision weight accuracy using the exclusive, high modulus carbon and super strong alloy core construction. The 4mm Procomp is an easy to tune shaft using accurate aluminum-carbon construction with reduced wind drifting and offered at an attractive price.
    The new Procomp arrow is compatible with most 4mm Easton components including direct fit G nocks and Deep Six nocks (recommended for high energy compound cam systems). See the included arrow chart for details on compatible point and pin nock systems. All Procomp shafts come in a factory sealed dozen pack (12 arrow shafts) with a ±1,0 grain weight tolerance (0,065 g).

    Specifications
    High strength carbon fiber bonded to a 7075 alloy core
    Straightness: ±0,0015”
    Weight tolerence: ±1,0 grain (0,065 g)
    Parallel design

    Size

    Shaft Weight
    GPI

    Shaft O.D.
    Inches

    Stock Length
    Inches

    4MM HL Point Fitment

    4MM Pin Fitment

    1150

    5.5

    .203

    28.5

    #1

    #1

    1000

    5.5

    .204

    29

    #1

    #1

    880

    5.9

    .207

    29.5

    #1

    #2

    810

    6.1

    .209

    30

    #1

    #2

    710

    6.5

    .213

    30.5

    #2

    #2

    660

    6.9

    .215

    32.63

    #2

    #2

    610

    7.3

    .218

    31

    #2

    #2

    570

    6.6

    .215

    31.63

    #2

    #2

    520

    7.0

    .217

    31.63

    #2

    #2

    470

    7.3

    .220

    32.63

    #2

    #3

    420

    7.8

    .224

    32.63

    #3

    #3

    380

    8.3

    .227

    32.63

    #3

    #4

    340

    8.9

    .231

    33.63

    #4

    #4

    300

    9.5

    .236

    33.63

    #4

    #4

    250

    10.8

    .245

    34.00

    #4

    #4

    Recommended parts

    4mm ml stainless steel break off point
    4mm pin
    4mm g nock
    pin nock
    G pin nock
    4mm microlite nock

    More in this video

    Archery Tech Team

    Learn More

6 Products

Set Descending Direction
per page
View as Grid List