Search results for: 'release'
Suggested search terms: releases, TRU Release, Release bag, Release pouch, Carter Release, TRU Ball Release, Releasen, Release t, Release trigger, Trigger release
- Related search terms
- releases 173
- Release trigger 55
- Release t 156
- Releasen 173
- Release 4 finger 53
-
UltraView Release The Hinge 2 - 3 FingerAs low as: €269.99
Ultra View Release The Hinge 3 Finger
About the product
If you think you need a large, you should get the medium. If you KNOW you should get the large get the large - we have never exchanged a medium for a large. You can upgrade your Hinge with The Wrist Bracket
100’s of peoples fingers and hands were measured to create finger bed sizes that are distinct and allow for extreme repeatably for hand placement in the body of the release. It truly is the most comfortable release you’ll ever shoot.
Customize your Hinge with an abundance of release accessories so it fits your hands perfectly. The access hole in the bottom of the release allows for super easy micro adjust. Just use a 1/16 Inch Allen key — to make the Hinge slower turn the internal set screw counterclockwise to make it faster turn it clockwise. Easily swap from click to no-click by switching your hooks. Simply remove the set screw on the head of the release and un-pin the existing hook and replace with a new one. Get different length hooks here.Designed for comfort, just hold it you'll see. Video
Specs
Material Brass or Aluminum
Weight
Brass Medium 3.20 Oz - 90.72 Gram
Brass Large 4.20 Oz - 119.07 Gram
Aluminum Medium 1.60 Oz - 45.36 Gram
Aluminum Large 2.00 Oz - 56.70 GramWhat is in the box
1x Hinge release in brass or aluminum
1x 0.014, 0.016, 0.018 or 0.020 Inch click or no-click hook pre-installed.
1x Aluminum peg bracket - thumb pegs sold separately
1x Aluminum 3-Finger Funky Finger in dark gray
1x 1/16 Inch gold Allen key for micro-adjust
1x Certificate of authenticity ensuring you get superior post purchase customer service and a higher re-sale value if you’re crazy enough to ever part ways with your Hinge. (post sales service and warranty transfer with the certificate of authenticity — we recommend not throwing it away.)Archery Tech Team
Learn More -
STAN Release Onnex Hinge 2022As low as: €317.00
STAN Release Onnex Hinge 2022
About the product
How the OnneX Hinge Works:
The OnneX Hinge features the innovative Draw Control system integrated into the release, providing a more confident, consistent, and relaxed draw and let-down with a hinge release. To activate Draw Control, hold down the thumb barrel during the draw cycle. Upon reaching full draw, release the thumb barrel and initiate your normal shot sequence. This system maintains consistent release angle from shot to shot, enabling precise micro-adjustments to release speed.
If you opt not to utilize Draw Control, it can be easily deactivated by tightening a screw at the base of the release, while still retaining full hinge functionality.
The OnneX Hinge offers a micro-adjustable firing position, allowing you to customize the release speed to your preference. Adjust the micro adjustment screw with a 5/64 Allen key: clockwise for faster release, counterclockwise for slower release.
The release comes with a no-click hook pre-installed and a clicking hook in the package.
Changing the Hook:
To change the hook, use a 1/16” Allen key to remove the screw locking in the dowel pin. With the pin removed, the hook can be replaced. Ensure the return spring is reinstalled with the new hook. Install the spring with the legs into the holes in the hinge head and the cross leg section wrapping to the back of the head. Slide the hook down behind the cross leg of the spring. Slide the dowel pin through the hinge head, spring, and hook, then reinstall the locking screw. Ensure all parts are correctly installed and the release functions properly before drawing your bow to avoid unintentional activation.Adjusting the Thumb Knob:
The thumb barrel is fully adjustable for height, angle, and tilt. Use a 5/64 Allen key to adjust it to your preference.Use of the Trainer Lock Pin:
The Trainer Lock Pin is a safety aid that prevents accidental firing while allowing normal release function. Install the pin based on your handedness preference and always ensure arrow nocking and aiming in a safe direction when using it.Changing Your Finger Extension:
The OnneX Thumb release includes two articulating finger extensions offering three or four finger options and a 30-degree sweep adjustability range. Use a 5/64 Allen key to switch between extensions.Archery Tech Team
Learn More -
Tru-Fire Release Sear Back TensionAs low as: €179.99Tru-Fire Release Sear Back Tension Archery Releases Learn More
-
STAN Release Onnex Hinge Heavy Metal 2022As low as: €334.99
STAN Release Onnex Hinge Heavy Metal 2022
About the product
How the OnneX Hinge Works:
The OnneX Hinge features the innovative Draw Control system integrated into the release, providing a more confident, consistent, and relaxed draw and let-down with a hinge release. To activate Draw Control, hold down the thumb barrel during the draw cycle. Upon reaching full draw, release the thumb barrel and initiate your normal shot sequence. This system maintains consistent release angle from shot to shot, enabling precise micro-adjustments to release speed.
If you opt not to utilize Draw Control, it can be easily deactivated by tightening a screw at the base of the release, while still retaining full hinge functionality.
The OnneX Hinge offers a micro-adjustable firing position, allowing you to customize the release speed to your preference. Adjust the micro adjustment screw with a 5/64 Allen key: clockwise for faster release, counterclockwise for slower release.
The release comes with a no-click hook pre-installed and a clicking hook in the package.
Changing the Hook:
To change the hook, use a 1/16” Allen key to remove the screw locking in the dowel pin. With the pin removed, the hook can be replaced. Ensure the return spring is reinstalled with the new hook. Install the spring with the legs into the holes in the hinge head and the cross leg section wrapping to the back of the head. Slide the hook down behind the cross leg of the spring. Slide the dowel pin through the hinge head, spring, and hook, then reinstall the locking screw. Ensure all parts are correctly installed and the release functions properly before drawing your bow to avoid unintentional activation.Adjusting the Thumb Knob:
The thumb barrel is fully adjustable for height, angle, and tilt. Use a 5/64 Allen key to adjust it to your preference.Use of the Trainer Lock Pin:
The Trainer Lock Pin is a safety aid that prevents accidental firing while allowing normal release function. Install the pin based on your handedness preference and always ensure arrow nocking and aiming in a safe direction when using it.Changing Your Finger Extension:
The OnneX Thumb release includes two articulating finger extensions offering three or four finger options and a 30-degree sweep adjustability range. Use a 5/64 Allen key to switch between extensions.Archery Tech Team
Learn More -
STAN Release Lynx Hinge Heavy MetalAs low as: €227.00
STAN Release Lynx Hinge Heavy Metal
About the product
How the LYNX Hinge Works:
The LYNX Hinge features the innovative Clutch System, designed to offer confident and consistent adjustment to the moon without affecting the release angle from shot to shot.
Adjusting the Speed:
To adjust the speed of the release, utilize the Clutch System with a 5/64” Allen key. Insert the key through the hole behind the thumb post and turn counterclockwise to release tension on the moon. Adjust the moon to your desired position for speed, then turn the key clockwise to reengage the Clutch and maintain tension on the moon.Changing the Moons:
Relieve pressure on the Clutch by turning the set screw counterclockwise two turns. Remove the dowel pin to disconnect the moon from the handle, allowing you to flip or replace it with the secondary moon. Ensure the rounded side of the moon faces downward, then slide it back into the handle and reinsert the dowel pin. Retighten the Clutch by turning the Allen key clockwise (avoid overtightening).Replacing the Thumb Post Mount:
Use a 3/32” Allen key to remove the screws on the handle above the thumb post mount. Replace the thumb post mount as desired, ensuring to reattach and retighten the screws securely (avoid overtightening).Adjusting the Thumb Knob:
The thumb barrel is fully adjustable for height, angle, and tilt. Use a 5/64” Allen key to adjust it to your preference.Use of the Trainer Lock Pin:
The Trainer Lock Pin enhances safety during training by preventing unintentional firing while allowing normal release function. Install the pin based on your handedness preference and always ensure arrow nocking and aiming in a safe direction when using it.Changing Your Finger Extension:
Swap between the two articulating finger extensions using a 5/64” Allen key. Reverse the process to reinstall the desired extension.Safety Note:
Unintentional activation or releasing the release at any point during the draw can result in serious injury or damage. This is not covered under warranty. Always exercise caution and follow proper handling procedures.By following these adjustment guidelines and safety precautions, you can optimize the performance of your LYNX Hinge release while ensuring safe and enjoyable shooting experiences.
Archery Tech Team
Learn More -
STAN Release Lynx Hinge BlackAs low as: €202.99
STAN Release Lynx Hinge Black
About the product
How the LYNX Hinge Works:
The LYNX Hinge features the innovative Clutch System, designed to offer confident and consistent adjustment to the moon without affecting the release angle from shot to shot.
Adjusting the Speed:
To adjust the speed of the release, utilize the Clutch System with a 5/64” Allen key. Insert the key through the hole behind the thumb post and turn counterclockwise to release tension on the moon. Adjust the moon to your desired position for speed, then turn the key clockwise to reengage the Clutch and maintain tension on the moon.Changing the Moons:
Relieve pressure on the Clutch by turning the set screw counterclockwise two turns. Remove the dowel pin to disconnect the moon from the handle, allowing you to flip or replace it with the secondary moon. Ensure the rounded side of the moon faces downward, then slide it back into the handle and reinsert the dowel pin. Retighten the Clutch by turning the Allen key clockwise (avoid overtightening).Replacing the Thumb Post Mount:
Use a 3/32” Allen key to remove the screws on the handle above the thumb post mount. Replace the thumb post mount as desired, ensuring to reattach and retighten the screws securely (avoid overtightening).Adjusting the Thumb Knob:
The thumb barrel is fully adjustable for height, angle, and tilt. Use a 5/64” Allen key to adjust it to your preference.Use of the Trainer Lock Pin:
The Trainer Lock Pin enhances safety during training by preventing unintentional firing while allowing normal release function. Install the pin based on your handedness preference and always ensure arrow nocking and aiming in a safe direction when using it.Changing Your Finger Extension:
Swap between the two articulating finger extensions using a 5/64” Allen key. Reverse the process to reinstall the desired extension.Safety Note:
Unintentional activation or releasing the release at any point during the draw can result in serious injury or damage. This is not covered under warranty. Always exercise caution and follow proper handling procedures.By following these adjustment guidelines and safety precautions, you can optimize the performance of your LYNX Hinge release while ensuring safe and enjoyable shooting experiences.
Archery Tech Team
Learn More -
Carter Release Total ControlAs low as: €259.99Carter Release Total Control Archery Releases Learn More
-
Carter Release Honey Gold AluminiumAs low as: €269.99Carter Release Honey Gold Aluminium Archery Releases Learn More
-
-
Carter Release NV 3-Finger Green€259.99Carter Release NV 3-Finger Green Archery Releases Learn More
-
-
Scott Release Longhorn Hunter Camo€171.99Scott Release Longhorn Hunter Camo Archery Releases Learn More
-
TruGlo Release BOA Closer System Release StrapAs low as: €35.99
TruGlo Release BOA Closer System Release Strap
About the Product
Adapt the comfort and ease of the BOA® wrist strap (available on all styles of TRUGLO releases) to other styles and brands of release heads.
Replaces your broken / worn-out wrist strap
Fits almost any connection system
BOA® closure system for a glove-like fit and all-day custom comfort< /li>
Quick on /quick off, one-hand adjustment
BOA® closures shed mud, dirt and even ice
PatentedArchery Tech Team
Learn More -
Topoint Backtension Release TP 462 AdjustbleAs low as: €72.99
Topoint Backtension Release TP 462 Adjustble
About the product
Highly adjustable back tension release from Topoint.
Specifications
Three thumb peg locations.
Aluminum CNC handle.
Aluminum insert or Brass insert for added weight.
Highly adjustable 2, 3 & 4 finger pieces included.
Available in 8 different colors.Archery Tech Team
Learn More -
TRU Ball Release HBC Honey Badger Claw Flex 3-4 Finger 2021As low as: €284.99
TRU Ball Release Honey Badger Claw Flex 3-4 Finger 2021,
About the product
New for 2021, the Reo Wilde signature HBC flex is a brass hinge back tension release with a new super-tough, black tungsten finish or our Quick Silver finish. The new Flex finger pieces are specifically designed for the HBC Flex, with their signature taper where the handle gets narrower towards the pinky. These flex finger pieces have a patented 30 degrees of movement at each pivot location. The articulating finger pieces give the release aid the versatility of a three finger or four finger model.
This may be the easiest release aid to adjust thanks to T.R.U. Ball's extremely popular Micro-Adjust Speed Dial Sear System. To adjust the release quicker, turn the screw clockwise and to make it slower, turn the screw counter-clockwise. An optional fast sear is sold separately.
The HBC Flex is available in small, medium or large sizes and comes standard with a small knurled thumb peg which adjusts to either side of the release to make it perfect for right or left hand use! A built-in lanyard comes with each release aid to ensure that you don't lose your release between shots. The HBC Flex is destined to become one of the most important part of gear in your bow box!Material Brass with black tungsten coating ore Brass with Quick Silver finish
Adjustable for both left and right handed
Color Black ore silverArchery Tech Team
Learn More -
Arc Systeme Release LAttendeux BrassAs low as: €290.99Arc Systeme Release LAttendeux Brass Archery Releases Learn More