STAN Release Onnex Hinge Heavy Metal 2022

STAN Release Onnex Hinge Heavy Metal 2022

About the product

How the OnneX Hinge Works:

The OnneX Hinge features the innovative Draw Control system integrated into the release, providing a more confident, consistent, and relaxed draw and let-down with a hinge release. To activate Draw Control, hold down the thumb barrel during the draw cycle. Upon reaching full draw, release the thumb barrel and initiate your normal shot sequence. This system maintains consistent release angle from shot to shot, enabling precise micro-adjustments to release speed.

If you opt not to utilize Draw Control, it can be easily deactivated by tightening a screw at the base of the release, while still retaining full hinge functionality.

The OnneX Hinge offers a micro-adjustable firing position, allowing you to customize the release speed to your preference. Adjust the micro adjustment screw with a 5/64 Allen key: clockwise for faster release, counterclockwise for slower release.

The release comes with a no-click hook pre-installed and a clicking hook in the package.

Changing the Hook:
To change the hook, use a 1/16” Allen key to remove the screw locking in the dowel pin. With the pin removed, the hook can be replaced. Ensure the return spring is reinstalled with the new hook. Install the spring with the legs into the holes in the hinge head and the cross leg section wrapping to the back of the head. Slide the hook down behind the cross leg of the spring. Slide the dowel pin through the hinge head, spring, and hook, then reinstall the locking screw. Ensure all parts are correctly installed and the release functions properly before drawing your bow to avoid unintentional activation.

Adjusting the Thumb Knob:
The thumb barrel is fully adjustable for height, angle, and tilt. Use a 5/64 Allen key to adjust it to your preference.

Use of the Trainer Lock Pin:
The Trainer Lock Pin is a safety aid that prevents accidental firing while allowing normal release function. Install the pin based on your handedness preference and always ensure arrow nocking and aiming in a safe direction when using it.

Changing Your Finger Extension:
The OnneX Thumb release includes two articulating finger extensions offering three or four finger options and a 30-degree sweep adjustability range. Use a 5/64 Allen key to switch between extensions.

Archery Tech Team