Release Back Tension

TRU Ball Release FulKrum Flex Quicksilver 3 or 4 Finger

About the product

The fulkrum flex quicksilver is a micro adjustable back tension release, it has a nicely weighted QS brass body, an enclosed smooth index finger and knurled middle, ring and pinky fingers, this ensures a great  feel. The fulkrum flex quicksilver features the comfort flex technology this allows the archer to select an infinite amount of finger bed locations on both the third finger and fourth finger handle pieces. Each piece can individually move 30 degrees. The fulkrum flex quicksilver has the lever alignment system (LAS) technology. This allows the archer to move the head of the release the outside edge of the index finger. This moves the point of release to different locations that make it easier to fire the release in individual different shooting styles. The fulkrum flex quicksilver also provides the archers who have accuracy robbing string or vane contact  with their face at full draw to adjust this with the LAS technology. The fulkum flex quicksilver has two separate sears one that contains a click and one that doesn’t and features a micro adjustable sear that can be adjusted with the included tool. This tool is screwed into the handle to remain with your release at all times. The micro adjustable sear has a lock  screw that needs to be loosened prior to making any travel adjustment and needs to be re-tightened after adjusting. To help referencing your settings there are laser engraved markings that are easily visible.

Specifications

Quicksilver finish
Weighted QS brass body
Comfort flex technology
30 degree moveable finger pieces
Lever alignment system

More in this video

Archery Tech Team

Ultra View Release The Hinge 3 Finger

About the product

If you think you need a large, you should get the medium. If you KNOW you should get the large get the large - we have never exchanged a medium for a large. You can upgrade your Hinge with The Wrist Bracket
100’s of peoples fingers and hands were measured to create finger bed sizes that are distinct and allow for extreme repeatably for hand placement in the body of the release. It truly is the most comfortable release you’ll ever shoot.
Customize your Hinge with an abundance of release accessories so it fits your hands perfectly. The access hole in the bottom of the release allows for super easy micro adjust. Just use a 1/16 Inch Allen key — to make the Hinge slower turn the internal set screw counterclockwise to make it faster turn it clockwise. Easily swap from click to no-click by switching your hooks. Simply remove the set screw on the head of the release and un-pin the existing hook and replace with a new one. Get different length hooks here.

Designed for comfort, just hold it you'll see. Video

Specs
Material Brass or Aluminum
Weight
Brass Medium 3.20 Oz - 90.72 Gram
Brass Large 4.20 Oz - 119.07 Gram
Aluminum Medium 1.60 Oz - 45.36 Gram
Aluminum Large 2.00 Oz - 56.70 Gram

What is in the box
1x Hinge release in brass or aluminum
1x 0.014, 0.016, 0.018 or 0.020 Inch click or no-click hook pre-installed.
1x Aluminum peg bracket - thumb pegs sold separately
1x Aluminum 3-Finger Funky Finger in dark gray
1x 1/16 Inch gold Allen key for micro-adjust
1x Certificate of authenticity ensuring you get superior post purchase customer service and a higher re-sale value if you’re crazy enough to ever part ways with your Hinge. (post sales service and warranty transfer with the certificate of authenticity — we recommend not throwing it away.)

Archery Tech Team

STAN Release Onnex Hinge Heavy Metal 2022

About the product

How the OnneX Hinge Works:

The OnneX Hinge features the innovative Draw Control system integrated into the release, providing a more confident, consistent, and relaxed draw and let-down with a hinge release. To activate Draw Control, hold down the thumb barrel during the draw cycle. Upon reaching full draw, release the thumb barrel and initiate your normal shot sequence. This system maintains consistent release angle from shot to shot, enabling precise micro-adjustments to release speed.

If you opt not to utilize Draw Control, it can be easily deactivated by tightening a screw at the base of the release, while still retaining full hinge functionality.

The OnneX Hinge offers a micro-adjustable firing position, allowing you to customize the release speed to your preference. Adjust the micro adjustment screw with a 5/64 Allen key: clockwise for faster release, counterclockwise for slower release.

The release comes with a no-click hook pre-installed and a clicking hook in the package.

Changing the Hook:
To change the hook, use a 1/16” Allen key to remove the screw locking in the dowel pin. With the pin removed, the hook can be replaced. Ensure the return spring is reinstalled with the new hook. Install the spring with the legs into the holes in the hinge head and the cross leg section wrapping to the back of the head. Slide the hook down behind the cross leg of the spring. Slide the dowel pin through the hinge head, spring, and hook, then reinstall the locking screw. Ensure all parts are correctly installed and the release functions properly before drawing your bow to avoid unintentional activation.

Adjusting the Thumb Knob:
The thumb barrel is fully adjustable for height, angle, and tilt. Use a 5/64 Allen key to adjust it to your preference.

Use of the Trainer Lock Pin:
The Trainer Lock Pin is a safety aid that prevents accidental firing while allowing normal release function. Install the pin based on your handedness preference and always ensure arrow nocking and aiming in a safe direction when using it.

Changing Your Finger Extension:
The OnneX Thumb release includes two articulating finger extensions offering three or four finger options and a 30-degree sweep adjustability range. Use a 5/64 Allen key to switch between extensions.

Archery Tech Team

STAN Release Onnex Hinge 2022

About the product

How the OnneX Hinge Works:

The OnneX Hinge features the innovative Draw Control system integrated into the release, providing a more confident, consistent, and relaxed draw and let-down with a hinge release. To activate Draw Control, hold down the thumb barrel during the draw cycle. Upon reaching full draw, release the thumb barrel and initiate your normal shot sequence. This system maintains consistent release angle from shot to shot, enabling precise micro-adjustments to release speed.

If you opt not to utilize Draw Control, it can be easily deactivated by tightening a screw at the base of the release, while still retaining full hinge functionality.

The OnneX Hinge offers a micro-adjustable firing position, allowing you to customize the release speed to your preference. Adjust the micro adjustment screw with a 5/64 Allen key: clockwise for faster release, counterclockwise for slower release.

The release comes with a no-click hook pre-installed and a clicking hook in the package.

Changing the Hook:
To change the hook, use a 1/16” Allen key to remove the screw locking in the dowel pin. With the pin removed, the hook can be replaced. Ensure the return spring is reinstalled with the new hook. Install the spring with the legs into the holes in the hinge head and the cross leg section wrapping to the back of the head. Slide the hook down behind the cross leg of the spring. Slide the dowel pin through the hinge head, spring, and hook, then reinstall the locking screw. Ensure all parts are correctly installed and the release functions properly before drawing your bow to avoid unintentional activation.

Adjusting the Thumb Knob:
The thumb barrel is fully adjustable for height, angle, and tilt. Use a 5/64 Allen key to adjust it to your preference.

Use of the Trainer Lock Pin:
The Trainer Lock Pin is a safety aid that prevents accidental firing while allowing normal release function. Install the pin based on your handedness preference and always ensure arrow nocking and aiming in a safe direction when using it.

Changing Your Finger Extension:
The OnneX Thumb release includes two articulating finger extensions offering three or four finger options and a 30-degree sweep adjustability range. Use a 5/64 Allen key to switch between extensions.

Archery Tech Team

TRU Ball Release Honey Badger Claw Flex 3-4 Finger 2021,

About the product

New for 2021, the Reo Wilde signature HBC flex is a brass hinge back tension release with a new super-tough, black tungsten finish or our Quick Silver finish. The new Flex finger pieces are specifically designed for the HBC Flex, with their signature taper where the handle gets narrower towards the pinky. These flex finger pieces have a patented 30 degrees of movement at each pivot location. The articulating finger pieces give the release aid the versatility of a three finger or four finger model.
This may be the easiest release aid to adjust thanks to T.R.U. Ball's extremely popular Micro-Adjust Speed Dial Sear System. To adjust the release quicker, turn the screw clockwise and to make it slower, turn the screw counter-clockwise. An optional fast sear is sold separately.
The HBC Flex is available in small, medium or large sizes and comes standard with a small knurled thumb peg which adjusts to either side of the release to make it perfect for right or left hand use! A built-in lanyard comes with each release aid to ensure that you don't lose your release between shots. The HBC Flex is destined to become one of the most important part of gear in your bow box!

Material Brass with black tungsten coating ore Brass with Quick Silver finish
Adjustable for both left and right handed
Color Black ore silver

Archery Tech Team

TRU Ball Release Sweet Spot Pro Flex 3 or 4 Finger Quicksilver

About the product

The SS Pro Flex release aid offers unparalleled customization and precision for archers. Featuring a 3-finger handle configuration, it allows for a flat finger bed, a swept handle finger bed, or a personalized in-between setting. For more versatility, a 4-finger option is available separately. Made from solid brass with a quicksilver finish, this release aid boasts ergonomic finger placements and Comfort Flex technology, enabling each finger location to adjust up to 30 degrees. As a leading back tension training device, it provides precise tension at any angle. To use, push the activator lever to draw, then release to engage back tension and shoot. Ideal for improving accuracy and technique, the SS Pro Flex is essential for serious archers.

More in this video

Archery Tech Team