Search results for: 'release'

B3 Archery Release Exit Mini

About the product

The B3 Archery Exit Mini is a high-performance three-finger thumb-button release, designed for archers with smaller hands. Featuring a lock-and-load system, fully radiused aluminum handle, and hardened stainless steel hook, this release ensures smooth and precise shot execution.

Exit Mini Features:
Three-finger ergonomic handle for a secure grip
Patented lock-and-load system for seamless operation
Large swirl thumb button with adjustable positioning
Hand-polished hardened 440C stainless steel hook
Fully radiused aluminum handle for comfort and control
Proprietary lock-and-load design—no cocking button required
Ideal for archers with small hands
Available in black, violet, red, and blue anodized finishes
The Exit Mini’s innovative lock-and-load mechanism removes the need for a cocking button, making operation quick, easy, and efficient. The large swirl thumb button is adjustable, allowing archers to fine-tune the trigger position for maximum control.

With a fully radiused aluminum handle, the Exit Mini provides superior comfort, reducing hand fatigue and ensuring consistent shots. Whether for target shooting or bowhunting, this durable and compact release delivers precision and reliability.

Test before buying at Archery Service Center!
For questions regarding sizes and specifications, feel free to contact us—our technical staff is happy to assist. Ask about the terms and conditions.

Archery Tech Team

Ultra View Release The Hinge 3 Finger

About the product

If you think you need a large, you should get the medium. If you KNOW you should get the large get the large - we have never exchanged a medium for a large. You can upgrade your Hinge with The Wrist Bracket
100’s of peoples fingers and hands were measured to create finger bed sizes that are distinct and allow for extreme repeatably for hand placement in the body of the release. It truly is the most comfortable release you’ll ever shoot.
Customize your Hinge with an abundance of release accessories so it fits your hands perfectly. The access hole in the bottom of the release allows for super easy micro adjust. Just use a 1/16 Inch Allen key — to make the Hinge slower turn the internal set screw counterclockwise to make it faster turn it clockwise. Easily swap from click to no-click by switching your hooks. Simply remove the set screw on the head of the release and un-pin the existing hook and replace with a new one. Get different length hooks here.

Designed for comfort, just hold it you'll see. Video

Specs
Material Brass or Aluminum
Weight
Brass Medium 3.20 Oz - 90.72 Gram
Brass Large 4.20 Oz - 119.07 Gram
Aluminum Medium 1.60 Oz - 45.36 Gram
Aluminum Large 2.00 Oz - 56.70 Gram

What is in the box
1x Hinge release in brass or aluminum
1x 0.014, 0.016, 0.018 or 0.020 Inch click or no-click hook pre-installed.
1x Aluminum peg bracket - thumb pegs sold separately
1x Aluminum 3-Finger Funky Finger in dark gray
1x 1/16 Inch gold Allen key for micro-adjust
1x Certificate of authenticity ensuring you get superior post purchase customer service and a higher re-sale value if you’re crazy enough to ever part ways with your Hinge. (post sales service and warranty transfer with the certificate of authenticity — we recommend not throwing it away.)

Archery Tech Team

STAN Release Onnex Hinge 2022

About the product

How the OnneX Hinge Works:

The OnneX Hinge features the innovative Draw Control system integrated into the release, providing a more confident, consistent, and relaxed draw and let-down with a hinge release. To activate Draw Control, hold down the thumb barrel during the draw cycle. Upon reaching full draw, release the thumb barrel and initiate your normal shot sequence. This system maintains consistent release angle from shot to shot, enabling precise micro-adjustments to release speed.

If you opt not to utilize Draw Control, it can be easily deactivated by tightening a screw at the base of the release, while still retaining full hinge functionality.

The OnneX Hinge offers a micro-adjustable firing position, allowing you to customize the release speed to your preference. Adjust the micro adjustment screw with a 5/64 Allen key: clockwise for faster release, counterclockwise for slower release.

The release comes with a no-click hook pre-installed and a clicking hook in the package.

Changing the Hook:
To change the hook, use a 1/16” Allen key to remove the screw locking in the dowel pin. With the pin removed, the hook can be replaced. Ensure the return spring is reinstalled with the new hook. Install the spring with the legs into the holes in the hinge head and the cross leg section wrapping to the back of the head. Slide the hook down behind the cross leg of the spring. Slide the dowel pin through the hinge head, spring, and hook, then reinstall the locking screw. Ensure all parts are correctly installed and the release functions properly before drawing your bow to avoid unintentional activation.

Adjusting the Thumb Knob:
The thumb barrel is fully adjustable for height, angle, and tilt. Use a 5/64 Allen key to adjust it to your preference.

Use of the Trainer Lock Pin:
The Trainer Lock Pin is a safety aid that prevents accidental firing while allowing normal release function. Install the pin based on your handedness preference and always ensure arrow nocking and aiming in a safe direction when using it.

Changing Your Finger Extension:
The OnneX Thumb release includes two articulating finger extensions offering three or four finger options and a 30-degree sweep adjustability range. Use a 5/64 Allen key to switch between extensions.

Archery Tech Team

STAN Release Onnex Hinge Heavy Metal 2022

About the product

How the OnneX Hinge Works:

The OnneX Hinge features the innovative Draw Control system integrated into the release, providing a more confident, consistent, and relaxed draw and let-down with a hinge release. To activate Draw Control, hold down the thumb barrel during the draw cycle. Upon reaching full draw, release the thumb barrel and initiate your normal shot sequence. This system maintains consistent release angle from shot to shot, enabling precise micro-adjustments to release speed.

If you opt not to utilize Draw Control, it can be easily deactivated by tightening a screw at the base of the release, while still retaining full hinge functionality.

The OnneX Hinge offers a micro-adjustable firing position, allowing you to customize the release speed to your preference. Adjust the micro adjustment screw with a 5/64 Allen key: clockwise for faster release, counterclockwise for slower release.

The release comes with a no-click hook pre-installed and a clicking hook in the package.

Changing the Hook:
To change the hook, use a 1/16” Allen key to remove the screw locking in the dowel pin. With the pin removed, the hook can be replaced. Ensure the return spring is reinstalled with the new hook. Install the spring with the legs into the holes in the hinge head and the cross leg section wrapping to the back of the head. Slide the hook down behind the cross leg of the spring. Slide the dowel pin through the hinge head, spring, and hook, then reinstall the locking screw. Ensure all parts are correctly installed and the release functions properly before drawing your bow to avoid unintentional activation.

Adjusting the Thumb Knob:
The thumb barrel is fully adjustable for height, angle, and tilt. Use a 5/64 Allen key to adjust it to your preference.

Use of the Trainer Lock Pin:
The Trainer Lock Pin is a safety aid that prevents accidental firing while allowing normal release function. Install the pin based on your handedness preference and always ensure arrow nocking and aiming in a safe direction when using it.

Changing Your Finger Extension:
The OnneX Thumb release includes two articulating finger extensions offering three or four finger options and a 30-degree sweep adjustability range. Use a 5/64 Allen key to switch between extensions.

Archery Tech Team

STAN Release Lynx Hinge Heavy Metal

About the product

How the LYNX Hinge Works:

The LYNX Hinge features the innovative Clutch System, designed to offer confident and consistent adjustment to the moon without affecting the release angle from shot to shot.

Adjusting the Speed:
To adjust the speed of the release, utilize the Clutch System with a 5/64” Allen key. Insert the key through the hole behind the thumb post and turn counterclockwise to release tension on the moon. Adjust the moon to your desired position for speed, then turn the key clockwise to reengage the Clutch and maintain tension on the moon.

Changing the Moons:
Relieve pressure on the Clutch by turning the set screw counterclockwise two turns. Remove the dowel pin to disconnect the moon from the handle, allowing you to flip or replace it with the secondary moon. Ensure the rounded side of the moon faces downward, then slide it back into the handle and reinsert the dowel pin. Retighten the Clutch by turning the Allen key clockwise (avoid overtightening).

Replacing the Thumb Post Mount:
Use a 3/32” Allen key to remove the screws on the handle above the thumb post mount. Replace the thumb post mount as desired, ensuring to reattach and retighten the screws securely (avoid overtightening).

Adjusting the Thumb Knob:
The thumb barrel is fully adjustable for height, angle, and tilt. Use a 5/64” Allen key to adjust it to your preference.

Use of the Trainer Lock Pin:
The Trainer Lock Pin enhances safety during training by preventing unintentional firing while allowing normal release function. Install the pin based on your handedness preference and always ensure arrow nocking and aiming in a safe direction when using it.

Changing Your Finger Extension:
Swap between the two articulating finger extensions using a 5/64” Allen key. Reverse the process to reinstall the desired extension.

Safety Note:
Unintentional activation or releasing the release at any point during the draw can result in serious injury or damage. This is not covered under warranty. Always exercise caution and follow proper handling procedures.

By following these adjustment guidelines and safety precautions, you can optimize the performance of your LYNX Hinge release while ensuring safe and enjoyable shooting experiences.

Archery Tech Team

STAN Release Lynx Hinge Black

About the product

How the LYNX Hinge Works:

The LYNX Hinge features the innovative Clutch System, designed to offer confident and consistent adjustment to the moon without affecting the release angle from shot to shot.

Adjusting the Speed:
To adjust the speed of the release, utilize the Clutch System with a 5/64” Allen key. Insert the key through the hole behind the thumb post and turn counterclockwise to release tension on the moon. Adjust the moon to your desired position for speed, then turn the key clockwise to reengage the Clutch and maintain tension on the moon.

Changing the Moons:
Relieve pressure on the Clutch by turning the set screw counterclockwise two turns. Remove the dowel pin to disconnect the moon from the handle, allowing you to flip or replace it with the secondary moon. Ensure the rounded side of the moon faces downward, then slide it back into the handle and reinsert the dowel pin. Retighten the Clutch by turning the Allen key clockwise (avoid overtightening).

Replacing the Thumb Post Mount:
Use a 3/32” Allen key to remove the screws on the handle above the thumb post mount. Replace the thumb post mount as desired, ensuring to reattach and retighten the screws securely (avoid overtightening).

Adjusting the Thumb Knob:
The thumb barrel is fully adjustable for height, angle, and tilt. Use a 5/64” Allen key to adjust it to your preference.

Use of the Trainer Lock Pin:
The Trainer Lock Pin enhances safety during training by preventing unintentional firing while allowing normal release function. Install the pin based on your handedness preference and always ensure arrow nocking and aiming in a safe direction when using it.

Changing Your Finger Extension:
Swap between the two articulating finger extensions using a 5/64” Allen key. Reverse the process to reinstall the desired extension.

Safety Note:
Unintentional activation or releasing the release at any point during the draw can result in serious injury or damage. This is not covered under warranty. Always exercise caution and follow proper handling procedures.

By following these adjustment guidelines and safety precautions, you can optimize the performance of your LYNX Hinge release while ensuring safe and enjoyable shooting experiences.

Archery Tech Team

TruGlo Release BOA Closer System Release Strap

About the Product

Adapt the comfort and ease of the BOA® wrist strap (available on all styles of TRUGLO releases) to other styles and brands of release heads.

Replaces your broken / worn-out wrist strap
Fits almost any connection system
BOA® closure system for a glove-like fit and all-day custom comfort< /li>
Quick on /quick off, one-hand adjustment
BOA® closures shed mud, dirt and even ice
Patented

Archery Tech Team

Tru ball release Sweet Spot Pro Flex 3 or 4 Finger Quicksilver

About the product

The SS Pro Flex release aid offers unparalleled customization and precision for archers. Featuring a 3-finger handle configuration, it allows for a flat finger bed, a swept handle finger bed, or a personalized in-between setting. For more versatility, a 4-finger option is available separately. Made from solid brass with a quicksilver finish, this release aid boasts ergonomic finger placements and Comfort Flex technology, enabling each finger location to adjust up to 30 degrees. As a leading back tension training device, it provides precise tension at any angle. To use, push the activator lever to draw, then release to engage back tension and shoot. Ideal for improving accuracy and technique, the SS Pro Flex is essential for serious archers.

More in this video

Archery Tech Team

Tru ball release Aileron HBC Flex 3 Finger Quick Silver Brass

About the product

HBC Aileron (Reo Wilde Signature Series) combines revolutionary technology and ergonomic design to create the ultimate release for archers. Adjust the handle width like airplane wing flaps and enjoy a perfect fit. Whether you prefer Metric (Medium: 17.5 cm / Large: 19.5 cm) or Imperial (Medium: 6.9 inches / Large: 7.7 inches), this release adapts to every need.

Specifications:
Knurled Handle Grips: For a secure, slip-free hold.
New Aileron Technology: Allows precise handle-width adjustments.
Patented Comfort Flex Third Finger Adjustment: Vertical customization for all hand sizes.
Aileron Adjustable Finger Beds: Aligns the release head on the second axis, mimicking airplane flaps.
Dual-Axis Adjustments:
1st Axis: Flex for vertical adjustment.
2nd Axis: Align the release head straight at the target.

Available in Medium and Large sizes, with the option to test before buying at Archery Service Center. Questions about sizing or specs? Contact us—our expert technical staff is here to help!

Archery Tech Team

Topoint Backtension Release TP 462 Adjustble

About the product

Highly adjustable back tension release from Topoint.

Specifications
Three thumb peg locations.
Aluminum CNC handle.
Aluminum insert or Brass insert for added weight.
Highly adjustable 2, 3 & 4 finger pieces included.
Available in 8 different colors.

Archery Tech Team

Tru ball release Honey Badger Claw Flex 3-4 Finger 2021,

About the product

New for 2021, the Reo Wilde signature HBC flex is a brass hinge back tension release with a new super-tough, black tungsten finish or our Quick Silver finish. The new Flex finger pieces are specifically designed for the HBC Flex, with their signature taper where the handle gets narrower towards the pinky. These flex finger pieces have a patented 30 degrees of movement at each pivot location. The articulating finger pieces give the release aid the versatility of a three finger or four finger model.
This may be the easiest release aid to adjust thanks to T.R.U. Ball's extremely popular Micro-Adjust Speed Dial Sear System. To adjust the release quicker, turn the screw clockwise and to make it slower, turn the screw counter-clockwise. An optional fast sear is sold separately.
The HBC Flex is available in small, medium or large sizes and comes standard with a small knurled thumb peg which adjusts to either side of the release to make it perfect for right or left hand use! A built-in lanyard comes with each release aid to ensure that you don't lose your release between shots. The HBC Flex is destined to become one of the most important part of gear in your bow box!

Material Brass with black tungsten coating ore Brass with Quick Silver finish
Adjustable for both left and right handed
Color Black ore silver

Archery Tech Team