Nock Depots & Turning Tools

APA Noc Doc Plus Pin Doctor

About the Product

It is time to change how you treat your nocks!
For years your spare nocks have been left in zip-lock bags, plastic containers or dusty quivers. Accessing them on the archery field has been a clumsy, time consuming process of hunting through a handful of colours often with limited time between ends. This all ends with the Noc-Doc, a simple tool for keeping you organised, saving you time and saving you money. Don’t throw away that burred pin. Take it to the doctor! Many broken nocks reveal damaged pins. That burr, without being removed can split a new nock or be very difficult to fit.

The integrated pin-Doctor feature of the Noc-Doc allows you to check for bent pins, gauge if the burr needs grinding and grind off the burr until it fits the new nock waiting in the dock below.

All this can be done while walking back to the shooting line. With the Noc-Doc plus Pindoctor a verry handy tool.

What can this product do for you?

Hold 12 new nocks
Load nock directly to pins
Check for bent pins
Repair burred nock-pins
Align nock to fletches
Scrape target debris from shafts

Archery Tech Team

Essentials Archery D - Loop Card

About the Product

Loop Card
Useful tool to measure the current loop length and to reproduce it again and again or in the desired changed length, with the help of the holes in the card to cut and make a new loop. Loop lengths from 12 to 27 mm* inside height of the loop possible with the Loop Card. You can also measure your center shot. The famous dimension 13/16" is marked with a star. Instructions on how to use the Loop Card can also always be called up via smartphone using the QR-Code on the Loop Card. *Specifications may vary as they depend on the nock used and the flaming on the second side of the loop rope.

Numbers on the Loop Card stand for the inner length of the Loop in mmScale on the short side (upper side) of the Loop Card is in mm. Scale on the long side (left) of the Loop Card is in inch. Line marked with a star = 13/16" Centershot measurement

Manual
1. Flame the loop rope at one end and, after a short wait, press it against a cold surface so that you get a small, flat surface.
2. Insert the loop rope with the unprocessed side from the front through the desired hole in the loop card and pull through to the end.
3. Pull the loop rope from the back over the loop card down to the bottom edge of the card.
4. Place the loop rope over the straight line at the bottom of the loop card (vertically below the selected hole) and cut the loop rope along the bottom edge.
5. Take the loop out of the card and flmae the second end as in step 1 and make the flat surface.
6. Tie the loop as usual.

Archery Tech Team

Beiter Push’n’Pull Universal for Nocks #1 #2 #1H and H

About the product

The Push'N'Pull is a universal Nock-Tool for alle Beiter Nocks, #1 or #2 asymmetric as well as #1H or Hunter.

Specifications
Material Molded Plastic
Dimensions 37x25x9 mm
Weight 85 Grain
Color Black

Archery Tech Team

Easton Plastic Nock Tool Archers

Tool for easy nock turning and a longer nock live

Only for easton nock's

Archery Tech Team