Shot Training Aids

Range O Matic Formaster Resistance Cord

About the product

The Original Formaster and Rigid Formaster Training Aids are excellent for the beginner, intermediate or expert archer. They teach proper back tension and follow-through techniques by establishing muscle memory throughout the draw and release. Technical manual and complete instructions are included. Installs on any bow.

The Original Formaster training aid uses a rubber resistance cord, which allows you to train with the full-release of an arrow.

Straps
To determine your size. Follow the next steps

Measure the full circumference around elbow with your draw arm completely straight. This measurement should be at the largest part of the elbow. The Strap should fit snugly around the draw arm when arm is bent in the full draw position. If strap is too large, it will slide down the arm, causing the rubber cord to be too weak to obtain optimal results.

Strap sizes
X-Small, Yellow, 8 – 9 Inch or 20.33 – 22.87 Cm
Small, Red, 9-10 Inch or 22 – 25.41 Cm
Medium, Blue, 10-11 Inch or 25.41 – 27.95 Cm
Large, Black, 11-12 Inch or 27.95 – 30.49 Cm
X-Large, Red Black, 12-13 Inch or 30.49 – 33.03 Cm
XX-Large, Blue Black, 13 – 14 or 33.03 – 35.56 Cm

Resistance Cord
It is generally recommended that
Juniors and beginners start with 13 – 17 lbs.
Women and young adults – 21 – 28 lbs.
Men – 28 – 31 lbs.
Please note. The maximum recommended pull-weight without shooting an arrow is 50 lbs. Do not use a finger tab with metal backing, it wil cut the rubber tubing. Do not stretch the rubber more than 4 times its length. Sooner or later the rubber cord wil wear out! Keep the device also out the sun while storing!
For the best results, an archer should use the heaviest resistance force cord he or she can control.

The power of the resistance cord is measured at 28 inch draw length.

40 up to 50 Bow draw use 28 or 31 Pound resistance cord
35 up to 45 Bow draw use 21 or 28 Pound resistance cord
30 up to 40 Bow draw use 17 or 21 Pound resistance cord
20 up to 35 Bow draw use 13 or 17 Pound resistance cord

The Original Formaster is designed with two pieces the Strap and the Resistance Cord.

Archery Tech Team

Range O Matic Formaster Elbow Strap

About the product

The Original Formaster and Rigid Formaster Training Aids are excellent for the beginner, intermediate or expert archer. They teach proper back tension and follow-through techniques by establishing muscle memory throughout the draw and release. Technical manual and complete instructions are included. Installs on any bow.

The Original Formaster training aid uses a rubber resistance cord, which allows you to train with the full-release of an arrow.

Straps
To determine your size. Follow the next steps

Measure the full circumference around elbow with your draw arm completely straight. This measurement should be at the largest part of the elbow. The Strap should fit snugly around the draw arm when arm is bent in the full draw position. If strap is too large, it will slide down the arm, causing the rubber cord to be too weak to obtain optimal results.

Strap sizes
X-Small, Yellow, 8 – 9 Inch or 20.33 – 22.87 Cm
Small, Red, 9-10 Inch or 22 – 25.41 Cm
Medium, Blue, 10-11 Inch or 25.41 – 27.95 Cm
Large, Black, 11-12 Inch or 27.95 – 30.49 Cm
X-Large, Red Black, 12-13 Inch or 30.49 – 33.03 Cm
XX-Large, Blue Black, 13 – 14 or 33.03 – 35.56 Cm

Resistance Cord
It is generally recommended that
Juniors and beginners start with 13 – 17 lbs.
Women and young adults – 21 – 28 lbs.
Men – 28 – 31 lbs.
Please note. The maximum recommended pull-weight without shooting an arrow is 50 lbs. Do not use a finger tab with metal backing, it wil cut the rubber tubing. Do not stretch the rubber more than 4 times its length. Sooner or later the rubber cord wil wear out! Keep the device also out the sun while storing!
For the best results, an archer should use the heaviest resistance force cord he or she can control.

The power of the resistance cord is measured at 28 inch draw length.

40 up to 50 Bow draw use 28 or 31 Pound resistance cord
35 up to 45 Bow draw use 21 or 28 Pound resistance cord
30 up to 40 Bow draw use 17 or 21 Pound resistance cord
20 up to 35 Bow draw use 13 or 17 Pound resistance cord

The Original Formaster is designed with two pieces the Strap and the Resistance Cord.

Archery Tech Team

Saunders Firing Release Trainer

About the product

The Saunders Firing-Line™ release trainer is a versatile and popular tool among archers and professionals. It serves as both a release aid checker and a practice tool, allowing archers to fine-tune their form and technique wherever they go. Here are some key features and benefits:

Compact Design: The trainer is compact and easily portable, fitting into a briefcase for convenient storage and transportation. This makes it ideal for practicing anywhere, whether at home, in the gym, or on the field.

Adjustable Draw Length: With quick draw-length adjustment ranging from 24 inches to 32 3/8 inches, the trainer accommodates various archers' needs and preferences.

Equivalent Draw Weight: The firing-line draw weight ranges from 25 to 28 pounds, roughly equaling the let-off weight of most bows. This ensures that the trainer provides a realistic feel and resistance, helping archers build strength and muscle memory.

Release Aid Conditioning: It functions as a release aid checker, conditioner, and practice tool. Archers can use it to refine their release technique, ensuring a smooth and consistent release every time.

Warm-Up Tool: The trainer allows archers to warm up without firing an arrow, making it perfect for pre-competition preparation or tuning a release.

Overcoming Target Panic: It helps overcome target panic by allowing archers to practice the perfect release repeatedly. This builds confidence and consistency, reducing anxiety during actual shooting situations.

Optional Weight Set: An optional three-pound weight set is available, providing archers with the feel of their actual bow and enhancing the training experience.

Smooth and Quiet Operation: The trainer operates smoothly and quietly, mimicking the feel of shooting a bow without the noise or recoil.

Please note that releases are not included with the trainer.

In summary, the Saunders Firing-Line™ release trainer is an essential tool for archers looking to improve their form, technique, and consistency. Its compact design, adjustable features, and practical benefits make it a must-have for both beginners and seasoned professionals alike.

Archery Tech Team

Spigarelli Elbow Pad 2020

The perfect training aid that everyone should use.

The Spiga Elbow Pad gives ou the opportunity to isolate and work on the back muscles and easily check your elbow allignement.

*Elastic connector for elbow pad available sold separately

Archery Tech Team 

Pedago Warm Up Tool With 3 Elastic Bands

The grip trainer is an educational tool for learning archery. It is made in France which guarantees its quality and solid. The grip is ambidextrous and the 5/16-24 insert allows to train with a stabilizer. The 3 elastic bands are interchangeable to adapt the power to the archer.

The grip trainer is an educational tool developed to facilitate learning or perfecting archery. It is an alternative to the rubber band on all educational situations or for warm-ups. It is offered with 3 different elastic tensions: red = soft, green = medium, blue = hard.

The Grip Trainer is guaranteed for 1 year (excluding on the elastic)

ASC Tech Team

KIS Archery Shooting Trainer for Compound Pro

About the product

Shooting Pro-Shot Trainer is designed to simulate the entire shot process through to shot execution without the use of an arrow. Clearly and accurately feel appropriate muscles, gain body awareness while experiencing accurate sight pictures, practice release, and follow through with mitigated post-shot response. Real sound clicker adds to an accurate recreation of actual shots within the archer's true clicker zone.

Archery Tech Team

KIS Archery Shooting Trainer for Recurve

About the product

Shooting Pro-Shot Trainer is designed to simulate the entire shot process through to shot execution without the use of an arrow. Clearly and accurately feel appropriate muscles, gain body awareness while experiencing accurate sight pictures, practice release, and follow through with mitigated post-shot response. Real sound clicker adds to an accurate recreation of actual shots within the archer's true clicker zone. Installs using the risers ATA standard 5/16 x 24 Berger/plunger hole. Please use both Berger hole and rest mount hole if equipped on riser. Adjust the 1/4-20 screw of the cantilever arm and pipe clamp to center the simulated arrow shaft within the sight window or slightly outside the center as you would set plunger depth. Draw out the simulated arrow shaft to connect to your bowstring at brace height. Remove nock set screw and attach to the bowstring. The simulated arrow shaft should be perpendicular to the string. Adjust nock height until perpendicular or slightly nock high. The use of soft tie on nock points would be recommended to maintain nock height. Adjustment pressure screw has a max turns 6 in. Pneumatic setting should correspond to limb weight

0-1 full turn in = 25lbs @ 27 Inch
1-2 full turns in = 23-30 lbs @ 27 Inch
2-3 turns in = 30-35 lbs @ 27 Inch
3-4 turns in = 35-40 lbs @ 27 Inch
4-6 turns in = 45 lbs @ 27 Inch

Settings are only guidelines Do Not exceed 50 lbs of weight when using the trainer
Notes. Too much pneumatic pressure the bow will vibrate and the piston will stop short, Too little pressure and piston may impact the trainer base or bow riser

Archery Tech Team