RamRods Stabilizer Long Vektor v1.1 Tungsten Damping Black

RamRods Stabilizer Long Vektor v1.1 Tungsten Damping Black

About the product

The RamRods Stabilizer Vektor has a taper design, multiple internal damping options and the best combination of stiffness, wind efficiency and damping!

The Vektor front stabilizer begins at an outer diameter of 0.63 inch and sleekly transitions down to a 0.5 inch outer diameter. The base of the stabilizer has more stiffness, there it experiences the most stress. It also gives more wind efficiency at the tip where the stabilizer has the highest amount of buffeting and torque from the wind.

The Vektor stabilizer works perfectly for both compound and recurve archers. The recommended weight ranges for the front stabilizer are 1-6 oz for crisp feel, 6-25 oz for ideal feel, 25+ for softer feel. This recommended weight range does not account for dampers or decouplers – mass weight that the stabilizer can handle increases when using dampers between weights or between the stabilizer and the weights.

Steve Wijler Edition Tungsten Damping Powder – adds 3 oz of tungsten powder to the distal end of the stabilizer to add internal weight and significant vibration reduction (VIBRO-CORE internal damping is still included).

For more information about this stabilizer, see this video

For the RamRods Vektor without the Tungsten damping, see this link

Specifications

VIBRO-CORE Internal Damping – remove unwanted vibration from your shot.

Size - 27”, 30” or 33 inch

Spine - ~90

Diameter - Long Rod 0.625″ to 0.5″ Taper

Thread Size - 5/16-24 threads on both proximal and distal endcap.

7075 Aluminum proximal and distal endcaps.

Flat slots in proximal endcap for tightening with a wide range of common tools.

30″ Vektor with standard VIBRO-CORE weighs 5.6oz and with Tungsten Damping weighs 8.6oz

Made in the USA | designed and hand-built by the owners

Archery Tech Team