Bow Stand Compound

Cartel Kick Stand Archery

About the product

Simple clip-on style bow stand.
Designed to fit bows using a long, target style stabilizer.
Clips on limbs to keep the bowcam away from hard or muddy surfaces.
Space saving design - spring holds stand with jaws open in more compact position when not in use.
Light weight design for easy transportation.

Use in Compound Archery, Barebow Archery, Traditional Archery

Material High-Impact Plastic

Archery Tech Team

Apex Gear Bow Split Limb Kwik Stand

About the product

Lightweight folding bow stand for split-limb (parallel-limb) bows.
You spend time and money configuring your bow to be exactly how you like it. Why would you then set it down in the dirt? Split grip folding bow stand holds your bow on the range or in the field, providing easy access while keeping your gear out of the mud. When not in use, the stand folds to fit into a pack, bow case, or even your back pocket. Rubberized grip provides a strong hold and won't scratch limbs.

Specifications
Ultra-tough composite construction.
Compact folding design.
Quick and easy use.
Fits most split-limb bow models 0.80 inch = 20.4. minimum opening).
Soft rubber-lined jaws accommodate thick or thin limbs.
Patent pending.

What is in the box
1x Apex Gear Split Grip Folding Bow Stand
Users guide on the package

Archery Tech Team

Avalon Compound Bowstands Tec-X Adjustble with Limb Protection

About the product

A good price quality Compound & Barebow bowstand.

Archery Tech Team

Mathews Compound Limb Legs Engage

About the product

Simple, silent and easy to use, the new Engage EXO Limb Legs® balance the bow without the cam or stabilizer needing to touch the ground. Engineered around the geometry of the bow, the new lightweight, ergonomic design brings a whole new level of balance and precision to you hunting setup. Designed specifically for the 2024 LIFT. Not compatible with pre-2024 bow models.

The new Engage Slim Limb Legs balance the bow without the cam or stabilizer needing to touch the ground. They can also remain on the bow while shooting. Designed for Mathews slim limb platforms. Including only the Prima, Avail, Stoke, HTR and HTX.

The Engage® Limb Legs® balance the bow without the cam or stabilizer needing to touch the ground. They can also remain on the bow while shooting. Designed for Mathews wide limb platforms including the Phase4, Image, V3X, V3, Atlas, VXR, Vertix, Traverse, TX-5, Triax, Halon, and Halon 32.

Archery Tech Team

ACU Archery Bow Safety Lock ACU Lok

About the product

Introducing the ACU Lok, crafted to prevent bows from being drawn with its molded ABS construction. This two-piece design easily attaches around strings and cables or the bow cam, providing protection from accidental dry fires and unauthorized access. Ideal for child protection and securing bows during air travel or in compliance with state laws, it features a simple yet durable design. Available in vibrant orange and proudly made in the USA, the ACU Lok is built to withstand repetitive use and ensure the safety of your bow wherever your archery adventures take you.

How to Install the ACU Lok:

Take the orange key and position it with the arms, flat side up.
Insert the key below the prongs of the ACU Lok. The key should cover up the ACU Lok logo.
Press the key in firmly, then slide the key and lock up the prongs.
Look on your bottom bow cam and find two holes where each prong could fit through without pushing on the bowstrings. Each prong should be on either side of the limbs.
Insert the part of the ACU Lok with the prongs, rigid side down through the holes in the cam.
Take the Lok, with the logo facing outward and the ring on the key above the prongs.
Slide the prongs into the holes of the Lok and push the Lok down on the prongs. There should be a clicking noise, indicating that the Lok is working.
To unlock the ACU Lok, grab the key with the arms flat side up.
Insert the key in the holes, under the prongs on the front of the lock.
Press firmly and slide the lock and the key up the prongs.
These steps ensure the secure installation and operation of the ACU Lok, providing peace of mind for bow safety and compliance.

Archery Tech Team

ACU Archery Bow Safety Lock Machined ACU LOK Elite

About the product

Introducing the ACU Lok Elite, designed to prevent bows from being drawn with its all-aluminum construction and laser-engraved details. Featuring Teflon anodizing and foam protection for cams, this lock provides security and peace of mind. It includes a key-operated lock with two keys, offering protection from accidental dry fires and child access. Ideal for securing bows through TSA and complying with state laws, it comes in various colors and is made in the USA. Simple to install and built to withstand repetitive use, the ACU Lok Elite ensures your bow stays secure wherever you go.

Installation Instructions for ACU Lok Elite:

Insert the key into the lock and turn to raise the arm.
Slide the lock off the prongs.
Find two holes where the prongs can slide through without pressure on the cam or bowstrings, ensuring they're on either side of the limbs.
Slide the lock down onto the prongs until the pads are firmly pressed against the limbs.
Align the arm with one of the holes on the prong and turn the key to fit it.
Remove the key.
To unlock the ACU Lok Elite, insert the key and turn to raise the arm, then slide the lock off the prongs.

Archery Tech Team