Ultra View

UltraView Release The Hinge2 - 3 Finger

About the product

Engineered for archery - Designed for you.

With The Hinge 2, we started the design by first looking at the human hand. How the release fits the hand is extremely important, your hand is what provides input to the release. We measured hundreds of hands and researched how they work – all the way down to the bone and muscle structure. The Hinge 2 release is truly one of the most comfortable releases you’ll ever shoot; Designed to fit your hand perfectly every time you draw your bow back. This consistent hand placement helps you develop rock-solid shot execution and tighter groups. Never let your release hang up again and become great with your archery with The Hinge 2.

Specifications
Micro-adjust click and fire - A dual moon system allows you to micro-adjust the timing of both your click and fire moons.
Deadly quiet magnetic head retention - A small magnet holds the head back from freely flopping around, making it whisper quiet in the woods and always at the ready.
Designed for comfort and consistency - The most comfortable and consistent release you will ever shoot. Deliberate, ergonomic finger beds that fit your hand perfectly.
Matte Black / Stainless Steel - A new finish available only on The Hinge 2.
Accessorize just the way you like it - 2, 3 and 4 finger Hunting Brackets in both anodized aluminum and matte black stainless options.

More in this video

Archery Tech Team

Ultra View UV Cirkles & Dots Kit

About the product

The UV - Dot Kit works fantastic with our UV3 scope.

Comes with four colors - Green, Yellow, Orange and Red

The ultraviolet light emitted from the light cartridge will illuminate these fluorescent sticker dots.

Most dot kits come with only one card of dots. As serious target archers we know that's just not enough, that's why our dot kit comes with 4 cards full to the max with dots, circles and crosshairs.

Archery Tech Team

Ultra View UltraGrip for Hoyt Hunting Bows

About the product

Fits all Hoyt hunting bows made after 2006 - Compatibility chart located at bottom of the description.

Beautifully crafted in a ceramic-composite polymer to ensure longevity and a warm to the touch feel, even in extremely cold weather.

Do your hands get cold when you're hunting? This grip is manufactured from a high quality composite material that stays warm to the touch. If you look close, on the surface of the grip you can see the actual fibers in the material that help inhibit the heat transfer.
Do you struggle with holding steady? This grip features a flat back that helps with bow hand torque and yields a more steady hold. It also has an additional 5º angle which has also been proven to help steady your hold.
Does your hand slip on your grip? The honeycomb texture on the face of the grip provides the perfect amount of texture ensuring your hand never slips again.
How to install the grip - The grip does not come with double sticky tape or adhesive. If you use any form of adhesive the grip will be extremely hard to remove! What we recommend for installation is, if the grip fits a little loose to the riser, thicken up the grip section of the riser using electrical tape or duct tape until the grip fits snugly onto the bow. This allows for a secure fit and you can still remove the grip from the bow if you wish.

Compatibility - Literally all (compound) Hoyt Hunting bows made after 2006.

For a full compatibility chart click this link.

Archery Tech Team

Ultra View BeeReal Mathews grip

About the product

In collaboration with Chris Bee we have truly made our best Mathews grip yet.

Beautifully crafted in a ceramic composite polymer to ensure longevity and a warm to the touch feel, even in extremely cold weather.

Do your hands get cold when you're hunting? The BeeReal grip is manufactured from a high quality ceramic-polymer composite material that stays warm to the touch. If you look close, on the surface of the grip you can see the actual fibers in the material that help inhibit the heat transfer.
Do you struggle with holding steady? This grip features a flat back that helps with bow hand torque and yields a more steady hold. It also has an additional 5º angle which has also been proven to help steady your hold.
Does your hand slip on your grip? The honeycomb texture on the face of the grip provides the perfect amount of texture ensuring your hand never slips again.
Do you want to shoot a 300 30x game? Results may vary, but Chris Bee's first Vegas round with a prototype grip was a 30x game.
How to install the grip - The grip does not come with double sticky tape or adhesive. If you use any form of adhesive the grip will be extremely hard to remove. What we recommend for installation is if the grip fits a little loose to the riser thicken up the grip section of the riser using electrical tape or duct tape until the grip fits snugly onto the bow. This allows for a secure fit and you can still remove the grip from the bow if you wish.

What bows this grip fits - This grip will fit any Mathews bow that was made 2019 or later and has the engage grip on it. This includes V3, VXR, Vertix, Traverse, TX-5, 2019 and later - TRX 36, 38 & 40. This grip WILL NOT FIT any Mathews bow made before 2019 or any other brand bow.

Archery Tech Team

Ultra View Level For UV3

About the product

A levels specifically for the UV3XL.

Kit Includes

1 - Blue Level
1 - Green Level
1 - Red Level

Archery Tech Team

Ultra View Nock On Custom PSE Ultraview Grip

About the product

The all-new Nock On PSE aftermarket grip, custom designed in partnership between John Dudley and Ultraview Archery, ensures hand placement repeatability and optimized positioning, resulting in increased accuracy. Every detail from the heel shape to the width, and cradle position to the minimalistic size, has been designed and refined to give PSE archers and bowhunters the ultimate grip. It features an anti-slip, multi-dimensional textured surface to prevent any shifting of hand placement due to wet weather conditions or perspiration. It is compatible with PSE model bows that have threaded grip holes. Your grip hand is the first and last contact point that impacts the flight path of your arrow. Get it right with the new Nock On, Ultraview PSE aftermarket grip.

Specifications
-Tailored grip to make finding the right hand position easy and repeatable
-Ambidextrous
-Multi-dimensional texture to prevent slip
-Flat back with NOCK ON approved edge radii to optimize hand seating to prevent left/right grouping problems
-Sleek and minimal design -- ensuring perfect contact with your hand only where it matters most

Attention
The UV Nock On PSE grip is compatible with PSE bows that have grip screw locations
NOTE: Each grip comes with 2 sets of screws. The black screws must only be used on the Carbon Levitate and the silver screws must only be used on aluminum model bows.

Archery Tech Team

Ultra View UVXL Lens Cartridge With Fiber Pin No Lens

About the product

For use with only the UV3XL. This Hunting Cartridge comes with an up-pin pre-installed. Designed specifically for single or double pin hunting setups.
Comes with either a single pin or double pin in 0.010 Inch or 0.019 Inch.
For double pin setups: The top pin is green and the bottom pin is red
For single pin setups: The pin is green
Allows you to have individual cartridges pre-setup for all your disciplines of archery; Hunting, 3D, Field, Indoor, Outdoor etc…
Your point of impact does not change when you swap your cartridges. For example, you could have a 0.019 Inch cartridge setup for close distance white tail and a 0.010 Inch setup for long distance elk hunting and interchange both and hit the same spot at all distances.
This cartridge will hold both a lens and an up-pin at the same time.
The cartridge is constructed out of a high quality molded polymer core.
The distance between the pins on the double pin set up is 0.25 Inch.
Does not come with a lens installed - must purchase a lens separately if you want one. Accepts lenses with a diameter of 1.750 Inch

Archery Tech Team

Ultra View UVXL Lens Cartridge Without Fiber

About the product

For use with only the UV3XL - This Lens Cartridge allows you to have individual cartridges pre-setup for all your disciplines of archery; 3D, Field, Indoor, Outdoor etc…

Installs into the UV3XL scope
Get a lens that fits here.
The cartridge is keyed ensuring your point of impact does not change when you swap it out.
This lens cartridge will hold both a lens and pin-ring at the same time.
The cartridge is constructed out of a high quality molded polymer core.
Does not come with a lens installed - must purchase a lens separately, accepts lenses with a diameter of 1.750 Inch
Please note - This lens cartridge will not fit the UV2 or UV3, just the UV3XL

Archery Tech Team

Ultra View Lens for UV3XL Scopes

About the product

Fits ULTRAVIEW Scope UV3XL.

Offered in 0x, 2x, 4x, 6x, and 8x and comes with the most optimal center drilled fiber size of 0.019 Inch.
Features the latest and most advanced multi-layer coatings available, the lens offers a distortion free image while maintaining a light transmittance over 99%.
The superb material, coating, and manufacturing process combine to offer superior scratch resistance, light transmission throughout the entire visible spectrum, and virtually eliminates reflection.
UV3XL lenses are cut to 1.750 Inch

Archery Tech Team

Ultra View Lens for UV3 Scopes

About the product

ULTRAVIEW Center Drilled Lens
Fits all ULTRAVIEW Scopes to include the UV2 & UV3.
Offered in 0x, 2x, 4x, 6x, and 8x and comes with the most optimal center drilled fiber size of 0.019 Inch. Features the latest and most advanced multi-layer coatings available, the lens offers a distortion free image while maintaining a light transmittance over 99%. The superb material, coating, and manufacturing process, combine to offer superior scratch resistance, light transmission throughout the entire visible spectrum, and virtually eliminates reflection. Cut to 1.350 Inch to fit perfectly in any ULTRAVIEW scope.

Archery Tech Team

Ultra View Lens Cartridge Without Fiber

About the product

Installs into the UV3 scope - Get a lens that fits here.
Please note It will not fit the UV2
Allows you to have individual cartridges pre-setup for all your disciplines of archery 3D, Field, Indoor, Outdoor etc.…
The cartridge is keyed ensuring your point of impact does not change when you swap it out.
This lens cartridge will hold both a lens and pin-ring at the same time.
The cartridge is constructed out of a high quality molded polymer core.

Archery Tech Team

Ultra View Lens Cartridge With Fiber

About the product

Installs into the UV3 scope. Please note, it will not fit the UV2.
Comes with a 0.010 Inch or 0.019 Inch Pin-Ring pre-installed with fiber spooled.
Allows you to have individual cartridges pre-setup for all your disciplines of archery, Hunting, 3D, Field, Indoor, Outdoor etc…
Your point of impact does not change when you swap your cartridges. For example, you could have a 0.019” cartridge setup for close distance white tail and a 0.010” setup for long distance elk hunting and interchange both and hit the same spot at all distances.
This cartridge will hold both a lens and Pin-Ring at the same time.
The cartridge is constructed out of a high quality molded polymer core.
Accepts lenses with a diameter of 1.350 Inch - 34.30 Mm

Archery Tech Team

Ultra View UV3 Light Cartridge

About the product

For use with only the UV3 not the UV3XL.

The new advanced light has 10 brightness levels, 5 individual LED’s for optimal brightness, auto off (after 4 minutes), allows you to light up your level and is 100% waterproof.
To light up your level, hold the power button for 2 seconds.
The 5 LED’s brightly illuminate colored dots and fiber without the need for an up pin or big ugly battery packs with loose wires.
Takes 2x 2025 batteries.

Archery Tech Team

Ultra View UV3 XL Light Cartridge

About the product

For use with only the UV3XL not the UV3.

The new advanced light has 10 brightness levels, 5 individual LED’s for optimal brightness, auto off (after 4 minutes), allows you to light up your level and is 100% waterproof.
To light up your level, hold the power button for 2 seconds.
The 5 LED’s brightly illuminate colored dots and fiber without the need for an up pin or big ugly battery packs with loose wires.
Takes 2x 2025 batteries.

Archery Tech Team

Ultra View Scope Rod

About the product

Scope Rod used to mount your UV3 or UV3XL to your sight

• Please reference the compatibility chart below to see what rod you need.
• This scope rod comes with an integrated tool that allows you to adjust the set screws on the side of the UV3 or UV3XL scope.
• This rod also comes with a 1/2" mounting bolt no extra hardware required