Compound Grip & Accessories

Mathews Grip Focus

About the product

The Mathews Grip Focus helps shooters minimize hand torque. It keeps the pressure concentrated in the center of the grip. There are a lot of colors available and fits most Mathews bows.

Specifications

Mathews Compound Grip

Right and Left handed

Color - Green, Pink, Yellow, Red, Orange, Blue, Purple

Archery Tech Team

Hoyt Grip X-Act

About the product

The Hoyt Grip X-Act assists you with consistent and good hand placement. A good hand placement is critical for accuracy. It’s an optimal overall grip, width, angle and shape. Available exclusively on Axius, Helix Turbo, Double XL, Torrex, Torrex XT and Nitrux model bows.

Specifications

Archery Tech Team

Mathews Grip Gunstock Walnut

About the product

The Matthews Grip Gunstock Walnut is specially made for Mathews Compound bows. It has a rich walnut color.

Specifications

For Mathews Compound bows

Color - Walnut

Archery Tech Team

Ultra View UltraGrip for Hoyt Hunting Bows

About the product

Fits all Hoyt hunting bows made after 2006 - Compatibility chart located at bottom of the description.

Beautifully crafted in a ceramic-composite polymer to ensure longevity and a warm to the touch feel, even in extremely cold weather.

Do your hands get cold when you're hunting? This grip is manufactured from a high quality composite material that stays warm to the touch. If you look close, on the surface of the grip you can see the actual fibers in the material that help inhibit the heat transfer.
Do you struggle with holding steady? This grip features a flat back that helps with bow hand torque and yields a more steady hold. It also has an additional 5º angle which has also been proven to help steady your hold.
Does your hand slip on your grip? The honeycomb texture on the face of the grip provides the perfect amount of texture ensuring your hand never slips again.
How to install the grip - The grip does not come with double sticky tape or adhesive. If you use any form of adhesive the grip will be extremely hard to remove! What we recommend for installation is, if the grip fits a little loose to the riser, thicken up the grip section of the riser using electrical tape or duct tape until the grip fits snugly onto the bow. This allows for a secure fit and you can still remove the grip from the bow if you wish.

Compatibility - Literally all (compound) Hoyt Hunting bows made after 2006.

For a full compatibility chart click this link.

Archery Tech Team

Ultra View BeeReal Mathews grip

About the product

In collaboration with Chris Bee we have truly made our best Mathews grip yet.

Beautifully crafted in a ceramic composite polymer to ensure longevity and a warm to the touch feel, even in extremely cold weather.

Do your hands get cold when you're hunting? The BeeReal grip is manufactured from a high quality ceramic-polymer composite material that stays warm to the touch. If you look close, on the surface of the grip you can see the actual fibers in the material that help inhibit the heat transfer.
Do you struggle with holding steady? This grip features a flat back that helps with bow hand torque and yields a more steady hold. It also has an additional 5º angle which has also been proven to help steady your hold.
Does your hand slip on your grip? The honeycomb texture on the face of the grip provides the perfect amount of texture ensuring your hand never slips again.
Do you want to shoot a 300 30x game? Results may vary, but Chris Bee's first Vegas round with a prototype grip was a 30x game.
How to install the grip - The grip does not come with double sticky tape or adhesive. If you use any form of adhesive the grip will be extremely hard to remove. What we recommend for installation is if the grip fits a little loose to the riser thicken up the grip section of the riser using electrical tape or duct tape until the grip fits snugly onto the bow. This allows for a secure fit and you can still remove the grip from the bow if you wish.

What bows this grip fits - This grip will fit any Mathews bow that was made 2019 or later and has the engage grip on it. This includes V3, VXR, Vertix, Traverse, TX-5, 2019 and later - TRX 36, 38 & 40. This grip WILL NOT FIT any Mathews bow made before 2019 or any other brand bow.

Archery Tech Team

PSE Grip Supra Focus

About the product

This grip fits Supra Focus, Centrix, Lazer, EVL, EVO NTN, Embark

Left or Right handed
Rubber or Plastic Molded

Archery Tech Team

Mathews Grip Engage

About the product

The new Mathews Angange Grip is designed for consistent hand placement. It reduces torque. It is a comfortable grip for all shooters regardless of hand size.

Specifications

Right and Left handed

Color - Black, Realtree edge

Archery Tech Team

Shrewd M.A.G. Mathews Adjustable Grip System

About the product

The Shrewd M.A.G. Mathews adjustable grip system fits Mathews bows using focus, wooden or flat backed grips. The adjustable design allows 0°, 4°,8° and 12° angles.

Specifications

Color - Black

Right and Left handed

Archery Tech Team

Ultra View Nock On Custom PSE Ultraview Grip

About the product

The all-new Nock On PSE aftermarket grip, custom designed in partnership between John Dudley and Ultraview Archery, ensures hand placement repeatability and optimized positioning, resulting in increased accuracy. Every detail from the heel shape to the width, and cradle position to the minimalistic size, has been designed and refined to give PSE archers and bowhunters the ultimate grip. It features an anti-slip, multi-dimensional textured surface to prevent any shifting of hand placement due to wet weather conditions or perspiration. It is compatible with PSE model bows that have threaded grip holes. Your grip hand is the first and last contact point that impacts the flight path of your arrow. Get it right with the new Nock On, Ultraview PSE aftermarket grip.

Specifications
-Tailored grip to make finding the right hand position easy and repeatable
-Ambidextrous
-Multi-dimensional texture to prevent slip
-Flat back with NOCK ON approved edge radii to optimize hand seating to prevent left/right grouping problems
-Sleek and minimal design -- ensuring perfect contact with your hand only where it matters most

Attention
The UV Nock On PSE grip is compatible with PSE bows that have grip screw locations
NOTE: Each grip comes with 2 sets of screws. The black screws must only be used on the Carbon Levitate and the silver screws must only be used on aluminum model bows.

Archery Tech Team