Pro Shop Tools
-
Essentials Archery D - Loop CardAs low as: €8.28
Essentials Archery D - Loop Card
About the Product
Loop Card
Useful tool to measure the current loop length and to reproduce it again and again or in the desired changed length, with the help of the holes in the card to cut and make a new loop. Loop lengths from 12 to 27 mm* inside height of the loop possible with the Loop Card. You can also measure your center shot. The famous dimension 13/16" is marked with a star. Instructions on how to use the Loop Card can also always be called up via smartphone using the QR-Code on the Loop Card. *Specifications may vary as they depend on the nock used and the flaming on the second side of the loop rope.Numbers on the Loop Card stand for the inner length of the Loop in mmScale on the short side (upper side) of the Loop Card is in mm. Scale on the long side (left) of the Loop Card is in inch. Line marked with a star = 13/16" Centershot measurement
Manual
1. Flame the loop rope at one end and, after a short wait, press it against a cold surface so that you get a small, flat surface.
2. Insert the loop rope with the unprocessed side from the front through the desired hole in the loop card and pull through to the end.
3. Pull the loop rope from the back over the loop card down to the bottom edge of the card.
4. Place the loop rope over the straight line at the bottom of the loop card (vertically below the selected hole) and cut the loop rope along the bottom edge.
5. Take the loop out of the card and flmae the second end as in step 1 and make the flat surface.
6. Tie the loop as usual.Archery Tech Team
Learn More -
Triple Trouble Clicker Locking Tool€7.49
Triple Trouble Clicker Locking Tool
About the Product
Use this tool to really tighten your Beiter clicker to your riser.
Never have any creep on your clicker position again.Archery Tech Team
Learn More -
Beiter Deburring Tool For Aluminium And Carbon Arrowshafts€16.99
Beiter Edge Off Tool
About the Product
Beiter Deburring Tool is a must have tool and is great for cleaning up the end of the shaft before you put the points into the shaft. Removes any burrs from where the shaft has been cut.
Archery Tech Team
Learn More -
OMP EZ Peeper String Separator€8.99
OMP EZ Peeper String Separator
One easy step allows for quick and proper strand separation during installation of string servings, peep sights and silencers. No bow press required.
Insert peep sight without a bow press
Archery Tech Team
Learn More -
OMP Freehand Bow & Arrow Level Kit 2 Pieces€21.99
OMP Freehand Bow & Arrow Level Kit 2 Pieces
Leveling value package includes:
Freehand Bow Level
One-handed operation for easy installation to bow string
Horizontal and vertical leveling
Works on all bow strings
Freehand Arrow Level
One-handed operation for easy installation to arrow shaft
Indicates when arrow is 90° from a level string
Works with all arrow shaft diametersArchery Tech Team
Learn More -
OMP Pro Shop Bench Hex Wrench Set 12 Pieces€58.00
OMP Pro Shop Bench Hex Wrench Set 12 Pieces
Wrench set featuring a dual sided L Frame shape, providing superior torque. Handles are over-molded with soft touch rubber for extra comfort. Size indicators are marked on tops of wrenches for easy identification.
Heavy duty, non-slip handles
Dual sided wrench for ease of use
Designed specifically for pro shop use
Convenient bench/wall mount base included
3/8″ – 5/64″Archery Tech Team
Learn More -
Dongs-Key Measuring Tape Inch & MM 13mm-3m€9.99Dongs-Key Measuring Tape Inch & MM 13mm-3m Archers Corner Tuning Learn More
-
-
Easton Accessory Maintenance Kit€34.99Easton Accessory Maintenance Kit Archers Corner Tuning Learn More
-
Lucky Stops Justo Micro Adjusting Sliding Draw Stop ToolAs low as: €139.98Lucky Stops Justo Micro Adjusting Sliding Draw Stop Tool Archers Corner Tuning Learn More