3D Targets Animal

Schosi 3D Target Brown Hare

Particular attention was paid to making it as compact as possible. There are therefore no ears that are shot off and fly away !! Carefully thought through when pegging! Pole 1 between the front legs on the base, pole 2 in the rear area. So no broken arrows on kill and body hits.

Length 52 cm
Height head 24.5 cm
Wide kill zone 15 cm
Wide back 19 cm
2 kill zones
Kill dimensions 10 / 16.5
Weight 4.6 kg
Group IV

ASC Tech Team

Schosi 3D Target Rabitt One Piece

Special features: The breast kill is placed higher than the side kill, which increases the lifespan. As with all targets, care was taken to ensure that there were no stakes of pegs in the immediate body and kill area. The rabbit is pegged through the small trunk of birch and in the back of the body! Holds perfectly, and no broken arrows when you shoot into the kill!

Head height 32 cm
Length 24 cm
3 kill zones 7.5 / 6 cm
Weight 1.2 kg
Group IV

ASC Tech Team

Schosi 3D Target Slug

Especially with smaller targets, care was taken to ensure that there were no stakes from the peg in the body. Therefore the snail creeps on a root. Caution!!!! The kill is not where most people think it is, in the middle of the house. It was placed further down to the right, where there is more foam volume. Originally the snail had the heart at the back of the house at the bottom !!! Ok so no risk of broken arrows on this target!

The sensors are specially cast from a special Sillicon, and can be reordered if lost! A pair is included and must be glued into the holes yourself, as these can break off during transport!

Height house 27 cm including base
Height head 42 cm incl. base
2 kill zones 8.5 / 8 cm
Weight 2.5 kg
Group IV

ASC Tech Team

Schosi 3D Target Posion Dart Frog

The specialty of my poison dart frog are the different selection of colors, the 3 kill zones, and the 3-fold anchoring in the ground. Again, I made sure that there are no sticks in the animal itself! The base is pegged at the back of the body and twice through the rock base! Therefore absolutely gentle on the arrow!

Height 48 cm
Wide kill area 16 cm
Length 56 cm
2 kill zones on the side 12/15 cm
1 kill zone at the front 12.5 / 10 cm
Weight 7.3 kg
Group III

ASC Tech Team

Schosi 3D Target Marmot

Weight: 2.6 kg
Height: 46 cm
Width: 19 cm
Kill dimension: 13 x 7 cm
Kill group 4

ASC Tech Team

Schosi 3D Target Garden Spider

The new oversized cross spider from Schosi3d is the largest 3d spider on the market worldwide! The front legs are foamed in pairs and put together under the head with a plug-in system! On the belly, 2 loops are foamed in for perfect attachment to the net.

Height 32cm
Width 1.25m
length 1.50m
Kill zone 19/19
Weight about 15 kg
Group III

ASC Tech Team

Schosi 3D Target Heron Deluxe

The Schosi3d Heron Deluxe is a sensation in the 3d target sector! With a special thin wire foamed in the middle from the front head end, down the neck to the trunk, it is possible to bend the neck in any position! This results in 2 major advantages: First, you can set up a nice group of different herons, second, the neck cannot be torn off when you pull the arrows!

The heron is also available as a normal version without reinforcement and is a little cheaper!

The animal is very moderate, and thanks to the perfect polyurethane foam for archery, it is once again one of the most durable animals of this size on the market! An absolutely high quality "Made in Austria" top product, made with great attention to detail.

Price / performance ratio - unbeatable!

Length 50 cm
Height 84 cm
Strength / width kill zone 17 cm
Kill zone 10/16 cm
Weight about 6 kg
IFAA: Group 4

ASC Tech Team

Schosi 3D Target Jumping Fox

The jumping fox is once again a special, unique target! Due to his position before the jump, he is very angled to shoot! An absolute challenge for every shooter! A must on every course, because you can set up the shot very interesting and very beautiful!

Foam for archery, again one of the most durable animals of this size on the market! The animal is very moderate, and thanks to the perfect polyurethane foam for archery, it is once again one of the most durable animals of this size on the market! An absolutely high quality "Made in Austria" top product, made with great attention to detail.

Price / performance ratio - unbeatable!

Height: 70cm
Width: 60 cm
Kill zone thickness: 18cm
Kill zone: 10/14
Approx. 5.5 kg
IFFA group: 4

ASC Tech Team

Schosi 3D Target Badger

The brand new Schosi3d badger is again unique and well thought out with its attitude. Care has also been taken to ensure that no arrows are damaged or broken when the target is fired upon by pegging with poles! It is pegged at the tree trunk and at the very back of the body. There are 3 kill zones! The animal is very moderate, and thanks to the perfect polyurethane foam for archery, it is once again one of the most durable animals of this size on the market! An absolutely high quality "Made in Austria" top product, made with great attention to detail.

Price / performance ratio - unbeatable!

Length 65 cm
Height 55 cm
Strength / width kill zone 18cm
Kill zone 13 / 18cm
Weight about 6 kg
IFAA: Group 4

ASC Tech Team

Schosi 3D Target Fire Salamander 2019

The brand new Schosi3d Salamander is unique and well thought out in its type and position. The world's first salamander for archery as a 3D target! Due to its flexibility, the base is slightly flexible and can be easily mounted on a lying tree trunk with screws and washers! It can also be perfectly pegged on the ground by 2 poles, and care has also been taken here that no arrows are damaged or broken when the target is fired upon by pegging with poles! The base is under the head and at the back of the body. There are 3 kill zones! The intro here is: The kill zones on the side are IFAA group 4, and the kill zone on the back is IFAA group 3! The animal is very moderate, and thanks to the perfect polyurethane foam for archery, it is again one of the most durable animals of this size on the market! An absolutely high quality "Made in Austria" top product, made with great attention to detail by hand.
Price / performance ratio - unbeatable!

Dimension 3d animal
length 101 cm
Height 35 cm
Strength / width kill zone 17 cm

Dimension base
length 117 cm
Width 46 cm
Kill zone / Side 10 / 16cm
IFAA: Group 4
Kill zone / back 17/9
IFAA: Group 3

ASC Tech Team

Schosi 3D Target Butterfly 2019

Schosi 3D Target Butterfly 2019

The brand new Schosi3d butterfly is unique on the market and well designed. A kill zone is engraved on the back so that the material can be used optimally! There are 3 types, the coloring can be ordered on customer request! Care has also been taken to ensure that no arrows are damaged or broken when the target is fired upon by pegging with poles! The animal is very moderate, and thanks to the perfect polyurethane foam for archery, it is once again one of the most durable animals of this size on the market! An absolutely high quality "Made in Austria" top product, made with great attention to detail.

Price / performance ratio - unbeatable!

length 56 cm
Height 52 cm
Strength / width kill zone 18cm
Kill zone 13 / 18cm
Weight approx 8.2 kg
IFAA: Group 4

ASC Tech Team