Adhesives Tape

Products 1-16 of 35

Page
Set Descending Direction
per page
View as Grid List
  1. Flex-Fletch Zing! Kling Adhesive Tube
    €16.99

    Flex-Fletch Zing! Kling Adhesive Tube

    About the product

    Zing! Kling Adhesive Tube for Fletching
    Zing! Kling Adhesive provides the fletcher with confidence that the process of fletching will be trouble-free and that the vanes will stay on. Zing! Kling is think enough to resist running and rubber-toughened to withstand high-speed abuse. It is the toughest fletching adhesive on the market!

    How To Use the Zing! Kling Adhesive Tube
    Surfaces to be bonded should be clean and dry. Apply only enough to leave a thin film layer after compression. Press parts together and hold firmly for a few seconds. Good contact is essential and an adequate bond develops in less than one minute. For a quicker cure time and stronger bond, use a Zing! Fletching primer Pen or Pint beforehand.

    Optimal Set-Time 30-60 seconds
    Full cure 24 hours
    Full cure with Zing! Primer 8 hours
    Product Size 0.7oz - 20g tube
    Extra Spout / Cap Encase mistakes happen, an extra spout - cap is included

    Archery Tech Team

    Learn More
  2. Flex-Fletch Zing! Combo Fletching Primer Pen & Kling Adhesive
    €24.99

    Flex-Fletch Zing! Combo Fletching Primer Pen & Kling Adhesive

    About the product

    "Zing, it's done" - Every user of this product. Buying the Fletching Primer Pen & Kling Adhesive Tube in one package saves time and money. The best products on the market to fletch arrows.

    Zing! Fletching Primer Pen
    The Zing! Fletching Primer Pen is the easiest, fastest, and strongest way to fletch your arrows. It speeds up the adhesion process and strengthens the bond.

    How To Use the Zing! Fletching Primer Pen
    The Zing! Fletching Primer Pen uses a plunge-action to wet the fiber tip with the correct amount of primer for precision application of the primer to the base of the vane or other plastic/rubber parts. There's no waste and no mess, even if you forget to put the cap back on! Then apply the Zing! Kling Adhesion.

    Dry Time 15-30 seconds
    On-Part Life 5 minutes
    Product Size 11 gm pre-loaded plunge-tip pen

    Zing! Kling Adhesive Tube
    Zing! Kling Adhesive is the toughest adhesive on the market and provides the fletcher with confidence that the process of fletching will be trouble-free and that the vanes will stay on. Zing! Kling is think enough to resist running and rubber-toughened to withstand high-speed abuse.

    How To Use the Zing! Kling Adhesive Tube
    Apply after the Zing! Fletching Primer Pen. Apply only enough to leave a thin film layer after compression. Press parts together and hold firmly for a few seconds. Good contact is essential and an adequate bond develops in less than one minute.

    Optimal Set-Time 30-60 seconds
    Full cure with Zing! Primer Pen 8 hours
    Product Size 0.7oz - 20g tube

    Archery Tech Team

    Learn More
  3. Flex-Fletch Zing! Fletching Primer Pen
    €16.99

    Flex-Fletch Zing! Fletching Primer Pen

    About the product

    Zing! Fletching Primer Pen Makes Fletching Arrows a Breeze!
    The Zing! Fletching Primer Pen is the easiest, fastest, and strongest way to fletch your arrows.
    Zing! fletching primer was the first primer to break onto the archery scene in the United States and is still the leader. It is an ozone friendly primer used to prepare polyolefin surfaces for bonding with cyanoacrylate adhesives (CA). It speeds up the adhesion process and strengthens it when bonding with Zing! adhesion glues.

    How To Use the Zing! Fletching Primer Pen
    The Zing! Fletching Primer Pen uses a plunge-action to wet the fiber tip with the correct amount of primer for precision application of the primer to the base of the vane or other plastic/rubber parts. There's no waste and no mess, even if you forget to put the cap back on! It is ideally used with a Zing! Kling adhesive tube. It also works well with most other cyanoacrylate adhesives. Not intended for use with solvent type adhesives such as Flex-Bond, Saunder NPV, or Bohning Platinum.

    Dry Time 15-30 seconds
    On-Part Life 5 minutes
    Ideal Adhesive Zing! Kling Adhesive Tube
    Full cure with Zing! Kling Adhesive Tube: 8 hours (24 hours without Zing! Fletching Primer)
    Product Size 11 gm pre-loaded plunge-tip pen

    Archery Tech Team

    Learn More
  4. Q2i Archery Steel Bond Fletch Glue Remover 1.0 Oz
    €19.99

    Q2i Archery Steel Bond Fletch Glue Remover 1.0 Oz

    About the product

    Decrease arrow prep time.
    Solvent eats away glue while not harming arrow shaft.
    Safe to use with aluminum, carbon & fiberglass.

    1 oz. bottle

    Test for color fastness on an inconspicuous are before using.

    Archery Tech Team

    Learn More
  5. Q2i Archery Steel Bond Fletch Glue 1.0 Oz
    €59.99

    Q2i Archery Steel Bond Fletch Glue 1.0 Oz

    About the product

    Incredible Control, Unreal Hold!

    Super high viscosity for easy control
    Clamp time 15 seconds, full cure 4-8 hours*
    For fletching aluminum, carbon, fiberglass & wood

    Times stated are for when used in conjunction with Q2i Archery Dual Polymer Technology Vanes. Other vanes and vane manufacturers products may differ.

    Archery Tech Team

    Learn More
  6. Q2i Archery Steel Bond Fletch Glue 0.5 Oz
    €30.00

    Q2i Archery Steel Bond Fletch Glue 0.5 Oz

    About the product

    Incredible Control, Unreal Hold!

    Super high viscosity for easy control
    Clamp time 15 seconds, full cure 4-8 hours*
    For fletching aluminum, carbon, fiberglass & wood

    Times stated are for when used in conjunction with Q2i Archery Dual Polymer Technology Vanes. Other vanes and vane manufacturers products may differ.

    Archery Tech Team

    Learn More
  7. Bohning Hot Melt Cool Flex
    €3.99

    Bohning Hot Melt Cool Flex

    About the product

    Ferr-L-Tite Cool Flex® is designed for points, inserts, outserts, and pin bushings on carbon shafts. This hot melt adhesive has flexible properties which keep it from cracking even after repeated target impacts. Cool Flex is a must for carbon shafts, but it also works great on aluminum and fiberglass. It requires a flame for installation, but just use HOT WATER for easy adjustment, replacement, or removal of points, inserts, outserts, and pin bushings. Cool Flex is fully cured as soon as it reaches room temperature (about 5 minutes), and its melting point is 280°F (137.8°C). Available in 12 gram sticks and 1 pound bricks. No expiration. Certified Crossbow Compatible.Proudly manufactured at the Bohning factory in Lake City, Michigan, United States.

    Archery Tech Team

    Learn More
  8. Bohning Hot Melt Ferr-L-Tite
    €2.99

    Bohning Hot Melt Ferr-L-Tite

    About the product

    Ferr-L-Tite® was Bohning's first product, developed in 1946, and has been the archery industry's standard ever since! This hot melt adhesive is designed for points, inserts, and outserts on wood and aluminum shafts (for carbon, we recommend Ferr-L-Tite Cool Flex). It requires an open flame for installation or removal and is fully cured as soon as it reaches room temperature (about 5 minutes). Ferr-L-Tite is heat reversible on aluminum shafts - flame required. It has a melting point of 350° F (176.7°C). Available in 12 gram sticks and 1 pound bricks. No expiration date. Certified Crossbow Compatible. Proudly manufactured at the Bohning factory in Lake City, Michigan, United States.

    Archery Tech Team

    Learn More
  9. Bohning Fletching Tape Dispenser
    €19.99
    Bohning Fletching Tape Dispenser Arrows Arrow Building Learn More
  10. XS Wings Wrapping Tape
    €5.99
    XS Wings Wrapping Tape Arrows Arrow Building Learn More
  11. XS Wings Fletching Tape
    As low as: €2.99

    XS Wings Fletching Tape 

    Fletching tape from XS Wings.

    Key features:

    • Fletching tape for securing spin vanes to the shaft.
    • Pre-cut for easy use.
    • Range of sizes to suit a selection of vane lengths.
    • Secure adhesion.
    • Package contains 10 sheets - + 1 free sheet!

    Technical specifications:

    Size chart for XS Wings. 
    40mm for 40mm vanes (52 strips per sheet)
    80mm for 50, 60 and 70mm vanes (26 strips per sheet)
    100mm for 100mm vanes (26 strips per sheet)

    Archery Tech Team

    Learn More
  12. Last Chance Archery Activator VMP
    €17.99
    Last Chance Archery Activator VMP Arrows Arrow Building Learn More
  13. Last Chance Archery Glue VMP
    €15.98
    Last Chance Archery Glue VMP Arrows Arrow Building Learn More
  14. Bohning Blazer Bond Bottle
    As low as: €13.00
    Bohning Blazer Bond Bottle Arrows Arrow Building Learn More
  15. Gas Pro Technical Hot Melt 20cm
    €2.99
    Gas Pro Technical Hot Melt 20cm Arrows Arrow Building Learn More
  16. Gold Tip Glue Tip Grainip Adhesive
    As low as: €6.99
    Gold Tip Glue Tip Grainip Adhesive Arrows Arrow Building Learn More

Products 1-16 of 35

Page
Set Descending Direction
per page
View as Grid List