Search results for: 'easton target shaft x10 arrows arrow shafts carbon aluminium'
- Related search terms
- arrow shaft 250
- arrow point 250
- arrow pin 250
- arrow points 250
- arrow shafts 250
-
Easton Target Shaft X10As low as: €537.99
Easton Target Shaft X10 Arrows
About the Product
The ultimate recurve competition shaft. The Easton X10 has won more World and Olympic titles than any other arrow- or any other archery product of any kind- since its competition debut at the 1996 Olympic Games in Atlanta, USA. Since making that gold-medal-winning debut, it has gone on to be used to win every single Olympic Medal since the Atlanta Games. High-modulus carbon fiber on a precision, thin-wall aluminum core creates an unmatched synergy of precision and durability. With components engineered to match the performance of this ultimate target shaft, every size X10 features a custom barreled design, providing the ultimate in clearance, finger release forgiveness, and the correct frequency match for modern recurve bows. X10. Nothing else comes close.
Made with pride by Easton in the USA.
Specs
High-strength carbon fiber bonded to a 7075 precision alloy core
Polished 9-micron carbon finish
Straightness: ± .0015”
Weight tolerance: ± 0.5 grains per packaged dozen
Weight coded for precision matching between dozens
Components—sold separately
Barreled design
Used to win every Olympic title since 1996IZE SHAFT WEIGHT
GPISPINE @ 28″ SPAN
DEFLECTION IN INCHESSHAFT O.D.
INCHESSTOCK LENGTH
INCHESMAX TRIM
INCHESRECOMMENDED POINT WEIGHT RANGE 1000 5.3 1.000 .176 28 No Limit 90-110 900 5.8 0.900 .186 28 No Limit 90-110 830 6.2 0.830 .200 28.5 No Limit 90-110 750 6.4 0.750 .190 29 3.5 100-110 700 6.7 0.700 .190 29 3.5 100-110 650 6.8 0.650 .195 29 3.5 100-110 600 7.0 0.600 .198 30 4.5 100-110 550 7.5 0.550 .200 31 3.5 100-120 500 7.8 0.500 .205 32 4.0 100-120 450 8.1 0.450 .207 33.5 5.5 100-120 410 8.5 0.410 .211 33.75 5.5 100-120 380 8.9 0.380 .213 33.75 6.5 100-120 350 8.8 0.350 .218 34 6.0 100-120 325 9.2 0.325 .221 34.25 6.0 100-120 1. Due to the barrel design of the X10, the weight is an average grains-per-inch of a 29” shaft. Shaft weight is slightly heavier in the larger diameter center and lighter toward the tapered ends. One inch of shaft cut from the point end typically weighs 6-7 grains.
2. Nominal O.D. at mid-point of shaft. Ends are smaller. Point end is larger diameter than nock end.
3. Recommended that no more than these lengths be cut from the point end of the shaft.For non-included but recommended parts/spare parts see the links down below
X10 point tungsten
X10 point steel
X10 outnock
pin nock
G pin nock (compound)Archery Tech Team
Learn More -
Easton Target Shaft X10 ProtourAs low as: €537.99
Easton Target Shaft X10 Protour
About the product
Since its introduction, the compound-specific X10 Protour has won more titles and set more records for compound archers than all other choices combined. Specifically engineered for compound target competition, Protour features a front taper allowing for every size to use Easton X10 point components- the same components that have been used to win every Olympic medal since 1996. The precisely engineered mass to spine ratio of each Procomp size ensures the best ballistic performance at longer compound competition distances, and gives archers an undeniable edge in unpredictable windy weather. With unmatched precision and legendary durability in even the most abusive target materials on the world circuit, Procomp is at the absolute performance pinnacle for compound target precision. Every Procomp arrow is proudly Made in USA by Easton.
Specifications
Lightweight, high-modulus carbon fiber bonded to a precision 7075 alloy core
Polished black carbon finish
Straightness ± .0015 Inch
Weight tolerance ± 0.5 grains
Components—sold separately
Tapered design
Made in USAZE SHAFT WEIGHT
GPISHAFT O.D.
INCHESSTOCK LENGTH
INCHESFRONT MAX TRIM
INCHESRECOMMENDED POINT WEIGHT RANGE X10 PIN FITMENT 770 6.0 .181 29 No Limit 90-110 #2 720 6.2 .183 29.75 No Limit 90-110 #2 670 6.5 .186 29.75 4.0 100-110 #2 620 6.7 .188 30 4.5 100-110 #2 570 6.9 .191 31 5.0 100-120 #2 520 7.3 .194 32 5.5 100-120 #2 470 7.6 .198 33.25 6.0 100-120 #2 420 8.0 .202 33.75 6.5 100-120 #2 380 8.4 .207 34 7.0 100-120 #2 340 8.8 .213 34 7.0 100-120 #2 GPI - Due to the taper design of the X10 Pro Tour, the grain weight per inch shown is an average weight per inch GPI of a 29 inch shaft. The shaft weight is slightly heavier toward the lager diameter nock end and lighter toward the tapered frond end. One Inch of the shaft cut from the point end typically weighs 6-7 Grain.
O.D. outher diameter, Nominal O.D. at mid front of the shaft. Frond end is smaller.
Trim Inches - Recommended that no more than these lenghts be cut from the front end of the shaft.For non-included but recommended parts/spare parts see the links down below
X10 tungsten point
X10 steel point
Pin nock
G pin nock (compound)Archery Tech Team
Learn More