Search results for: 'archery tools'

Dongs-Key Archery Tool Box 11.55 x 8.62 x 2.41 Cm

About the Product

Careful and safe storage of archery items. No more damage, your score now remains optimal and it fits easily in your Quiver and or pouch.

Archery storage box
Size 11.55 x 8.65 x 2.25 Cm - 4.54 x 3.36 x 0.88 Inch
Material aluminium

Archery Tech Team

ACU Archery Nock Point Set Brass ACU Stax

About the product

Introducing ACU STAX from ACU Archery, an innovative solution that replaces individual brass nok sets. Precision-machined from solid brass on Swiss turn machines, these stacks offer unparalleled quality and consistency. simply crimp them onto your bowstring for hassle-free installation. each stack represents the equivalent of one red nok set and is trusted by top bowstring manufacturers. available in sets of 2, 3, 4, and 5, and offered in both one-piece and 10-piece bags. choose the weight that suits your needs:

2 Stax: 15 grains each
3 Stax: 22.5 grains each
4 Stax: 30 grains each
5 Stax: 37.5 grains each
upgrade your archery setup with ACU STAX for enhanced precision and performance.

Archery Tech Team

Gray Archery Bare Bow Judge Inspection Ring

About the product

Barebow inspection ring from Gray Archery. 122mm inner diameter ring for measuring your unbraced bow. 9.3mm slot and drilled hole to measure your arrows/shafts. 9.4mm drilled hole allows you to check the maximum point diameter for World Archery regulated competitions. 20mm, 40mm & 60mm cut out rulers for various appliances.

Specifications
Color Black
Material Aluminum
Size 3 mm Thickness

Archery Tech Team

KIS Archery Shooting Trainer for Compound Pro

About the product

Shooting Pro-Shot Trainer is designed to simulate the entire shot process through to shot execution without the use of an arrow. Clearly and accurately feel appropriate muscles, gain body awareness while experiencing accurate sight pictures, practice release, and follow through with mitigated post-shot response. Real sound clicker adds to an accurate recreation of actual shots within the archer's true clicker zone.

Archery Tech Team

KIS Archery Shooting Trainer for Recurve

About the product

Shooting Pro-Shot Trainer is designed to simulate the entire shot process through to shot execution without the use of an arrow. Clearly and accurately feel appropriate muscles, gain body awareness while experiencing accurate sight pictures, practice release, and follow through with mitigated post-shot response. Real sound clicker adds to an accurate recreation of actual shots within the archer's true clicker zone. Installs using the risers ATA standard 5/16 x 24 Berger/plunger hole. Please use both Berger hole and rest mount hole if equipped on riser. Adjust the 1/4-20 screw of the cantilever arm and pipe clamp to center the simulated arrow shaft within the sight window or slightly outside the center as you would set plunger depth. Draw out the simulated arrow shaft to connect to your bowstring at brace height. Remove nock set screw and attach to the bowstring. The simulated arrow shaft should be perpendicular to the string. Adjust nock height until perpendicular or slightly nock high. The use of soft tie on nock points would be recommended to maintain nock height. Adjustment pressure screw has a max turns 6 in. Pneumatic setting should correspond to limb weight

0-1 full turn in = 25lbs @ 27 Inch
1-2 full turns in = 23-30 lbs @ 27 Inch
2-3 turns in = 30-35 lbs @ 27 Inch
3-4 turns in = 35-40 lbs @ 27 Inch
4-6 turns in = 45 lbs @ 27 Inch

Settings are only guidelines Do Not exceed 50 lbs of weight when using the trainer
Notes. Too much pneumatic pressure the bow will vibrate and the piston will stop short, Too little pressure and piston may impact the trainer base or bow riser

Archery Tech Team

Essentials Archery D - Loop Card

About the Product

Loop Card
Useful tool to measure the current loop length and to reproduce it again and again or in the desired changed length, with the help of the holes in the card to cut and make a new loop. Loop lengths from 12 to 27 mm* inside height of the loop possible with the Loop Card. You can also measure your center shot. The famous dimension 13/16" is marked with a star. Instructions on how to use the Loop Card can also always be called up via smartphone using the QR-Code on the Loop Card. *Specifications may vary as they depend on the nock used and the flaming on the second side of the loop rope.

Numbers on the Loop Card stand for the inner length of the Loop in mmScale on the short side (upper side) of the Loop Card is in mm. Scale on the long side (left) of the Loop Card is in inch. Line marked with a star = 13/16" Centershot measurement

Manual
1. Flame the loop rope at one end and, after a short wait, press it against a cold surface so that you get a small, flat surface.
2. Insert the loop rope with the unprocessed side from the front through the desired hole in the loop card and pull through to the end.
3. Pull the loop rope from the back over the loop card down to the bottom edge of the card.
4. Place the loop rope over the straight line at the bottom of the loop card (vertically below the selected hole) and cut the loop rope along the bottom edge.
5. Take the loop out of the card and flmae the second end as in step 1 and make the flat surface.
6. Tie the loop as usual.

Archery Tech Team