Stabilizers

Beiter V-Box Basic Steel Kit

About the Product

he Beiter V-BOX is the base of a multifunctional dampening system for stabilizer systems. The stiffness of the V-BOX can be modified with the interchangeable membranes which have different properties. The system is completed by weights and compensation spacers which can be mounted with different screws, threaded studs and adaptors. Beiter Centralizers can be ordered with 5/16"-24 inner or outer weight adapters at no extra charge. But the V-box is compatible with almost all available stabilizer systems. On systems using a 5/16 thread, the Beiter V-BOX can be mounted on the standard thread that comes with the stabilizers, while for stabilizers using 1/14 threads, inner and outer thread adaptors to a 5/16"size are available.

the Beiter V-BOX STEEL has a weight off 5.10 Oz - 145 Gram. Thanks to the stainless steel shells, the Membrans can be used with different weights recommended is

#1 6 Oz - 180 Gram
#3 10 Oz - 300 Gram
#5 16 Oz - 450 Gram
#7 25 Oz - 710 Gram

more to see in this video

Archery Tech Team

Dead Center Aluminum Weight End Cap - Pink Arrow Project

About the Product

Top off your weight stack with the Aluminum Weight Cap. Laser engraved. O-Rings around the outside allow for superior tightening and additional vibration dampening.

All Profits Donated, of this item, go to the Pink Arrow Project - Aiming for a Cure.

Dimensions: 1.25 Inch in diameter matches the size of our 1oz weights

Threaded: 1/4-20

Weight 1 OZ = 28 Gram including threaded rod

Finish Pink

Archery Tech Team

Dead Center Shock Response System Pink Arrow Project

About the Product

The SRS kills felt vibration when added to your weight stack. The SRS utilizes an internal rubber dampening system with a solid center and machined aluminum caps to create a superior dampening product.
Made to fit in-line with your weight stack, the SRS flexes independantly requiring weight to be added to both ends securing the system.

Weight 1.5 OZ = 43 Gram
Dimensions 1.25 Inch diameter = 31.75 Mm

Thread: 1/4x20
All Profit Donated, of this Item, to the Pink Arrow Project - Aiming for a Cure

Note that the SRS cannot be utilized at the very end of a weight stack and must be secured at both ends either against the stabilizer and with weights on the opposite end, or between the weight stack. Additional short threaded stud like the 3/4 Inch stud that included in the Stud Kit (sold separately) may be required to accommodate a small amount of weight, weight cap or end protector.

Archery Tech Team

Dead Center Shock Response System 1/4-20 Thread

About the Product

The SRS - Shock Response System - kills felt vibration when added to your weight stack. The SRS utilizes an internal rubber dampening system with a solid center and machined aluminum caps to create a superior dampening product. Made to fit in-line with your weight stack, the SRS flexes independantly requiring weight to be added to both ends securing the system.

Weight 1.5 OZ = 42 Gram
Dimensions 1.25 Inch diameter = 31.75 Mm
Thread 1/4x20

Note that the SRS cannot be utilized at the very end of a weight stack and must be secured at both ends either against the stabilizer and with weights on the opposite end, or between the weight stack. Additional short threaded stud like the 3/4" stud that included in the Stud Kit (sold separately) may be required to accommodate a small amount of weight, weight cap or end protector.

Watch the Dead Center SRS on You Tube

Archery Tech Team

Dead Center Aluminum Weight End Cap - Black

About the Product

Top off your weight stack with the Aluminum Weight Cap. Laser engraved with the Dead Center X logo. O-Rings around the outside allow for superior tightening and additional vibration dampening.

Dimensions 1.25 Inch = 31,75 Mm in diameter (matches the size of our 1 oz = 28 Gram weights)

Threaded 1/4-20

Weight 1oz = 28 Gram including threaded rod

Finish Matte Black or Pink

Archery Tech Team

Dead Center HD Series Single Offset Bar Threaded - 5/16-24 Thread

About the Product

The original series of mounting hardware from Dead Center features CNC machined aluminum for lightweight construction, infinitely adjustable arms that rotate and pivot for precise positioning, and include vibration dampening o-rings. All in a mount that won't break you budget.

Single Offset Bar Threaded
The simple solution for fixed position mounting of a rear stabilizer.
Includes Mounting bolt

Weight: 2.0 Oz = 57 Gram

Archery Tech Team

Dead Center HD Series V-Bar Dual Mount

About the Product

The original series of mounting hardware from Dead Center features CNC machined aluminum for lightweight construction, infinitely adjustable arms that rotate and pivot for precise positioning, and include vibration dampening o-rings. All in a mount that won't break you budget.

HD Series V-Bar Dual Mount. Allows for front or rear mounting of a v-bar setup.
Includes Mounting bolt and stabilizer clamping rods.

Weight: 6.0 Oz = 170 Gram

Archery Tech Team

Dead Center HD Series Short Rear Single Offset Mount 

About the Product

The original series of mounting hardware from Dead Center features CNC machined aluminum for lightweight construction, infinitely adjustable arms that rotate and pivot for precise positioning, and include vibration dampening o-rings. All in a mount that won't break you budget.

HD Series Short Rear Single Offset Mount. Designed to utilize the lower rear mounting hole for a rear stabilizer. Fits Right or Left Hand.
Includes Mounting bolt and stabilizer clamping rod.

Weight: 3.0 Oz = 85 Gram

Archery Tech Team

Dead Center HD Series Front Single Offset Mount

About the Product

The original series of mounting hardware from Dead Center features CNC machined aluminum for lightweight construction, infinitely adjustable arms that rotate and pivot for precise positioning, and include vibration dampening o-rings. All in a mount that won't break you budget.

HD Series Front Single Offset Mount. Allows for the position of the rear stabilizer to be less inhibited by riser geometry due to the curved design. Fits Right or Left Hand.

Includes Mounting bolt and stabilizer clamping rod.

Weight: 4.0 Oz = 113 Gram

Archery Tech Team

Dead Center Diamond Series V-Bar Dual Mount

About the Product

The Diamond Series of mounts are precision engineered for rock solid performance and perfect balance. Featuring a TaperLok design at each joint which allows for necessary infinite adjusting and simply will not come loose regardless of the amount of weight used on the stabilizer. Laser engraved tuning marks allow for precise positioning.

Diamond Series V-Bar Mount
Engineered to accommodate a front or rear mounted V-Bar dual stabilizer system. Includes Mounting bolt and stabilizer clamping rods.

Weight 8.2 OZ = 235 Gram

Watch the Diamond series mounting on You Tube

Archery Tech Team

Dead Center Diamond Series Riser Mout - Single

About the Product

The Diamond Series of mounts are precision engineered for rock solid performance and perfect balance. Featuring a TaperLok design at each joint which allows for necessary infinite adjusting and simply will not come loose regardless of the amount of weight used on the stabilizer. Laser engraved tuning marks allow for precise positioning.

Model Specifications
Uniquely designed to mount through the bow riser. Includes: Mounting bolt and stabilizer clamping rod. Fits Right or Left Hand.

Weight 5.4 OZ = 153 Gram

Watch the Diamond series mounting on You Tube

Archery Tech Team

About the Product

The Diamond Series of mounts are precision engineered for rock solid performance and perfect balance. Featuring a TaperLok design at each joint which allows for necessary infinite adjusting and simply will not come loose regardless of the amount of weight used on the stabilizer. Laser engraved tuning marks allow for precise positioning.

Model Specifications
Diamond Series Single Offset Mount. Single Offset Mount is the ideal mounting solution for front or rear installation. Fits Right or Left Hand.

Includes Mounting bolt and stabilizer clamping rod.
Weight 4.4 OZ = 125 Gram

Watch the Diamond series mounting on You Tube

Archery Tech Team

Dead Center Diamond Series Single Offset Mount - Hoyt Specific

About the Product

The Diamond Series of mounts are precision engineered for rock solid performance and perfect balance. Featuring a TaperLok design at each joint which allows for necessary infinite adjusting and simply will not come loose regardless of the amount of weight used on the stabilizer. Laser engraved tuning marks allow for precise positioning.

Model Specifications
Diamond Series Single Offset Mount. Single Offset Mount is the ideal mounting solution for front or rear installation. Fits Right or Left Hand.

Includes Mounting bolt and stabilizer clamping rod.

Weight 4.4 OZ = 125 Gram

Watch the Diamond series mounting on You Tube

Archery Tech Team

Dead Center Diamond Series Single Offset Mount

About the Product

The Diamond Series of mounts are precision engineered for rock solid performance and perfect balance. Featuring a TaperLok design at each joint which allows for necessary infinite adjusting and simply will not come loose regardless of the amount of weight used on the stabilizer. Laser engraved tuning marks allow for precise positioning.

Model Specifications
Diamond Series Single Offset Mount. Single Offset Mount is the ideal mounting solution for front or rear installation. Fits Right or Left Hand.

Includes Mounting bolt and stabilizer clamping rod.

Weight 4.4 OZ = 125 Gram

Watch the Diamond series mounting on You Tube

Archery Tech Team